|
The Beast
Just a simple place to put all my thoughts. Right now, just the planning. As I get them done I will update each item with a post # as reference. These are not in order of goal, just the list. Also, some items may change, if they do I will update the change and reference post as needed. This way all the discussions can be as separate posts and not clog up this build page.
The Beast is a 1990 XJ. Mileage at time of purchase 180k. Work done so far: Oil Pressure Sending Unit (unresponsive pressure guage) High mileage belt (Napa brand) Oil change at 189k (Royal Purple 10w30 NAPA filter) NAPA branded fuel filter (dies, sputtered, no start) Oil filter neck adapter o-ring (bad leak after oil change) Negative battery cable (almost 18" fully exposed copper!!) Junkyard driver side door (omg old one busted all over! Creature Comforts of the Butt And remaining list: (in no particular order!) Safaripal JK LED Taillights Rugged Ridge Snorkel Precleaner Triple Fan radiator setup in debate HERE TNT Coilover rear end Long Arms and front long arm discussion HERE Hurst Short Throw shifter discussion HERE Oliver's Double Cardan Driveshaft J.W. Speaker 8900 LED headlights Iron Rock Off-road over-the-knuckle steering upgrade Ares Fab rear quarter panel armor in debate with myself because I need to change the rear end for shocks and springs... I guess I could mod this armor after my rear end upgrade... Also planning on following THIS guide to "tub" the rear... Gonna be a ton of mods when I get this far! FOX 2" bump stops Skull Steelies Dick Cepek Crushers if I can find them. This is NOT the right size. If not Crushers, then Extreme Country Brown Dog Industries Polyurethane Motor Mounts Super Kit Haven't looked for: Long travel shocks. Only want 3-4" of lift Steering box brace (know I'm gonna need it) Decent price winch (would LOVE WARN but they are $$$) Good rear bumper Roof rack Sliders Currently building a new DASH EDIT: Adding My Jeep Was STOLEN |
Quite the list of things to do with this build and I will be following to see all the things you do accomplish and don't accomplish for whaver life reasons throw at you. Is this a new build right? So photos of your XJ would be awesome!!! Yes you have one in your avatar but we love photos!!
I got to check out that "tub" the rear build link you sent I would be interested in that. What part of Western Washington? |
Will take some pics tomorrow. As I remember things, I will update the first post I made. Such as the motor mounts I just added! Also, forgot to add that I did get some new wheels and tires. Will post those up as well
I'm in Bremerton, hopefully not for much longer, looking for a place near Silverdale/Poulsbo/Kingston |
No worries we just like photos over here or it didn't happen! :) Maybe I'm just being selfish because I'm not home from my deployment yet to mess with mine and I love looking at all the work everyone has done or is doing to thiers. Jealous~! Keeping me busy out here lol
|
That's right you are stationed at Everett NB right? Which command?
|
Yea I'm stationed over in Everett area. Onboard the USS KIDD we are currently deployed but due back very soon! *Hopefully*
|
Looking forward to this. I'm over in Port Orchard, we should hit the trails some time.
|
Sure! I might be able to do baby trails right now, but I rub in the front and no lift done yet. My estimate is summer, maybe early fall, once I get shocks and springs to lift 3". This build log is all goals for the build, some parts are gonna be waiting for a while
|
Originally Posted by SirCyber
(Post 3440397)
Sure! I might be able to do baby trails right now, but I rub in the front and no lift done yet. My estimate is summer, maybe early fall, once I get shocks and springs to lift 3". This build log is all goals for the build, some parts are gonna be waiting for a while
|
True... But I know they have also upgraded many trails out there... I should still be able to do some out there
|
Originally Posted by SirCyber
(Post 3440408)
True... But I know they have also upgraded many trails out there... I should still be able to do some out there
|
Pics!
Got a request for pics, so I took some! Woulda got out yesterday but was down with a stomach bug
without any further adieus, the pics!https://cimg7.ibsrv.net/gimg/www.che...41a4b04424.jpgFront end https://cimg9.ibsrv.net/gimg/www.che...a54a13909c.jpgSide profile. Note that the rear driver sits about 1" lower than rear passenger https://cimg7.ibsrv.net/gimg/www.che...aeaadaf597.jpgAs seen here https://cimg2.ibsrv.net/gimg/www.che...0571b32006.jpgKissed by truck I was pulling out. They neglected to tell me that they had no brakes https://cimg4.ibsrv.net/gimg/www.che...d97ee04360.jpg https://cimg8.ibsrv.net/gimg/www.che...60d355dd94.jpg https://cimg8.ibsrv.net/gimg/www.che...8620a3a187.jpg https://cimg9.ibsrv.net/gimg/www.che...15db1b8e80.jpgYes, it's been rhinolined... Very poorly. There are numerous places they didn't get enough, and they got ALL weatherstripping! Hood, doors, rear hatch, everything. Also, they did the interior, and got the stuff on portions of the wiring harness and a few connectors https://cimg7.ibsrv.net/gimg/www.che...4498a28d03.jpg https://cimg0.ibsrv.net/gimg/www.che...8c9e322e15.jpg https://cimg2.ibsrv.net/gimg/www.che...e1903f9d8b.jpgJust a few pics of the interior... Still fighting with the wiring harness. Weather has been prohibitive of me getting much done. https://cimg4.ibsrv.net/gimg/www.che...86ad1a1727.jpg https://cimg7.ibsrv.net/gimg/www.che...7f6fdd0e1f.jpgLook ma! No shrouds! Also missing the aux fan... https://cimg5.ibsrv.net/gimg/www.che...008a7d06cb.jpgAnd associated wiring https://cimg4.ibsrv.net/gimg/www.che...da7be5b6ad.jpgPassenger side... https://cimg5.ibsrv.net/gimg/www.che...979c2d39a5.jpgReally need new motor mounts https://cimg6.ibsrv.net/gimg/www.che...f8b3b7cd14.jpgNote:EGR not attached to anything. https://cimg4.ibsrv.net/gimg/www.che...b5bbedc2ba.jpgAnd lots of shoddy zipties. Well, that's what I have for now. |
Wow I don't mean to come off sounding harsh but did you get that for free? I sure hope you did or next to nothing you got your work cut out for you. Here I thought I was starting off bad well I could be worse then you I still have not seen mine in person lol just photos. I would love to help you out with your build when I get home if you need help. That is a project for sure! Refresh my memory what your plans are with this? Are you going to turn it into a overland build or off roading build? Or DD?
|
Thanks for sharing the photos I'm very anxious to see your progress!
|
Disregard my asking of what your going to do with it lol I scrolled back up was being lazy and see your to do list again of everything you will do to it.
|
| All times are GMT -5. The time now is 03:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands