Project: Honey Badger
#1
Seasoned Member
Thread Starter
Join Date: Jun 2012
Location: Sacramento, CA
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Project: Honey Badger
Well ive done enough since I ended my last build to finally start another.
For those of you who want to spend the time looking through pictures heres the link to my old Build Thread
Since then:
UPGRADES:
-7/8 Heim Steering
-c-rok steering brace
-Pan hard trac bar
-trac bar brace
-RE trac bar mount
-tank relocated
-rock lights
-increased rear lift height
-front bumper (Didn't last long)
-Relocated sound bar to behind drivers seat
Fixed:
-Broke driver side ujoint
-CB hooked back up since car accident
-Replaced broken brake booster
-Rewelded roof rack so spare doesnt hit the roof
-Replaced old steering box
-Wrapped Injectors + line for heat soak issue
-New exhaust manifold
-Both Drivelines committing suicide
-Leaking front T-case Seal
-Both Hub assemblies
-Fixed leaking exhaust system (thanks CA Smog for the forced motivation)
-Tune up including:
New Dist/Dist Cap/Rotor/Wires/Plugs/TPS/CPS/IAC/MAP/IGN Coil/CTS/PCV Valve/AIR & OIL Filter/valve cover gasket/Oxygen Sensors
If you read through all that then let me reward you with pictures!
*In no particular order*
For those of you who want to spend the time looking through pictures heres the link to my old Build Thread
Since then:
UPGRADES:
-7/8 Heim Steering
-c-rok steering brace
-Pan hard trac bar
-trac bar brace
-RE trac bar mount
-tank relocated
-rock lights
-increased rear lift height
-front bumper (Didn't last long)
-Relocated sound bar to behind drivers seat
Fixed:
-Broke driver side ujoint
-CB hooked back up since car accident
-Replaced broken brake booster
-Rewelded roof rack so spare doesnt hit the roof
-Replaced old steering box
-Wrapped Injectors + line for heat soak issue
-New exhaust manifold
-Both Drivelines committing suicide
-Leaking front T-case Seal
-Both Hub assemblies
-Fixed leaking exhaust system (thanks CA Smog for the forced motivation)
-Tune up including:
New Dist/Dist Cap/Rotor/Wires/Plugs/TPS/CPS/IAC/MAP/IGN Coil/CTS/PCV Valve/AIR & OIL Filter/valve cover gasket/Oxygen Sensors
If you read through all that then let me reward you with pictures!
*In no particular order*
Last edited by SacXJguy; 03-29-2014 at 09:15 PM.
#2
Seasoned Member
Thread Starter
Join Date: Jun 2012
Location: Sacramento, CA
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Braced my steering box to fix the unibody around the box from tweaking. I should honestly just plate the whole unibody but just too lazy
#6
Yeah, that steering looks great. You should deep six the front fenders and comp cut the rear quarters and stretch it a couple inches. It will complete the militaristic look.
#7
Seasoned Member
Thread Starter
Join Date: Jun 2012
Location: Sacramento, CA
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Locked the rear now and headed to the 'con right after it snowed. Expected only 1-2" but got a lot more than that but we still went. Broke a lot more things than I wanted to.
Trending Topics
#9
Seasoned Member
Thread Starter
Join Date: Jun 2012
Location: Sacramento, CA
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
#12
Seasoned Member
Thread Starter
Join Date: Jun 2012
Location: Sacramento, CA
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Honey badger has custom ruffstuff long arms now! Also went to the rubicon again this year and finally made it up soup bowl. I'll post a video if anyone cares to watch it. Starting to plan a 60/14bolt swap in the future but for now this set up is doing it.