Adding 97-01 Liftgate on 84-96 Jeep Cherokees
 

Has anyone added the 97-01 Liftgate on a 84-96 Jeep Cherokee? I was at the JY messing with some of the newer Cherokees such as a 2001 and liked how it could open by it self "Like mine Does" but also closes by it self. Also have more options with the 97-01 taillights to pick from.

One thing I noticed was the top hinges were on the inside on the 97-01 where the 84-96 are on the outside. Witch don't matter to me as I can fix that.

My 1991 Jeep Cherokee Back View
https://www.cherokeeforum.com/member...do/21189-a.jpg

A 2001 Back View
https://www.cherokeeforum.com/member...-back-view.jpg




I already accomplished seeing if a 97-01 Front Header Panel would work and it fits on fine. The only hard part was finding my right paint color as its hard to find.

https://www.cherokeeforum.com/member...p-cherokee.jpg

are you sure the width is the same for the 01 and what year you have?

Body lines don't exactly match but the newer ones are actually metal not fiberglass so they dent not bust. Rather happy about that fact. The rear glass doesn't tend to fall out when flexing with the newer ones either.

For the Header Panel or the LiftGate?

liftgate

I don't know yet. I'll be going to the JY this weekend for find out.

I know the 97-01 taillights will fit on the 84-96 Cherokees but the tailgate will not close properly.
If I remember the older taillight boxy ones are 11-1/2 and the newer round is 12-1/2

will be watching this thread i was wanting to do the same thing with the lift gate i knew the header would work but not match the fender shape with out replacing the fenders to but wasnt sure about the gate and the lights

it doesnt work

well it would if you cut the back off a 97+ and welded it on. thats would be about the only way and isnt really worth it. and trust me i would do it if possible. my 92 is has like 65% of an 01 on it

didnt think it would work but hey like they say doesn't hurt to ask

Are you talking about where the hinges go on the back? on mine the hinges are on the top of the roof, as the 01 are located on the inside. I was going to go with adding the hings on top like how mine is now. Also I can't remember but is the handle on the liftgate that holds the door closed the same style nob in the middle or is it a difftrent hook?

its a completely different shape. I was talking about cutting everything behind the window and swapping it to make it work

yea if you wanted to go that far than it would work but is it really worth the time and effort to do it

Has anyone ever cutted away the small 1" above the box style tail lights for the 01 taillights to fit?

Heres my new image of my back with the new added 01 corner bumbers on it. I think it looks nice since I got the bumber painted red.
https://www.cherokeeforum.com/member...ack-corner.jpg

that might work but then you wouldnt have that body line were the door 90's and the tail lights would round might look funny imo