99 small block xj.
 

So I picked up another xj after getting mine just where I wanted it to be. So now we start new. Base is a 99 xj with leaf spring conversion sitting on geared and locked one tons, and using a nitrous

Attachment 279951



Attachment 279952



Attachment 279953



Attachment 279954



Attachment 279955



Attachment 279956



Attachment 279957



Attachment 279958



Attachment 279959



Attachment 279960

fed small block, turbo 400 trans with a 3200 stall and a np208 case. Right now the jeep is mocked up and able to clear 40s very well. I will be updating as im able to get some more work done to it. Right now I'm in process of building the motor and trans then I will be plating and stiffening the uni body, along with building the motor mounts.

nice! I was thinkin about doing a chevy small block swap but decided to do a 4bt in he future instead. Keep up the work!

Sweet base. Can't wait to see the finished product

Nice! Finally a build thread that's different for a change!

Agreed. Its not the same 4.5 inch lift, stroker build thread. That's one crazy steering angle though

haha yeah. Look like need either full hydro or at least high steer set up with drop pitman

That is just set up to move around the yard its will have full hydro steering.

excited to see more of this!

I am intrigued by the thread title alone.
Please, tell us more.

Well where to start. It's a 99 Cherokee that's had all the drive Tran and unnecessary parts removed down to the wire harness being stripped of all non essentials. Is getting a very healthy 350 in it that has been completely rebuilt with all new from pan to carb including complete arp engine blot and stud kit, and set of custom headers that will exit the front fenders. That will have a nice 100-150 shot on top of it. The trans is a turbo 400 with a boss hog 3200 stall and a bdm shift kit along with a few other internal mods. It's sitting on 39.5 boggers, with a set of Chevy 1 tons locked and geared to 4.56s. Still trying to decide on what hydro steer setup. Should leave the hole fairly nicely. Have xj 6.5 leaves out back and a set of 6 inch yj springs up front. The inside will be gutted of all but the seats and dash. A custom gauge cluster will be made will all auto meter gauges. Am looking do put full cage and bucket seats in it. It has along way to go but will get there first thing first it getting the uni body stiffened and plenty of bracing. It's a work in progress and not a die will be spared to make it perfect.

Sounds like a plan to me.
I'll definitely be watching this build.

Subbed

Haven't had a whole lot of time to work on it. But I went threw the harness and deleted all the electrical I won't need, and started to plate the unibody for the engine. Had to grind some welds cause I ran out of gas for the welder not happy about that but so far so good.

Attachment 281244



Attachment 281245



Attachment 281246



Attachment 281247



Attachment 281248



Attachment 281249



Attachment 281250

Well got some more done today. The motor is officially in and now ill start wiring it.

Attachment 281544



Attachment 281545



Attachment 281546



Attachment 281547



Attachment 281548



Attachment 281549



Attachment 281550



Attachment 281551



Attachment 281552



Attachment 281553

Nice! Lookin good man.