99 Jeep XJ Intro and expedition "build" attempt! Plus some restoration.
#17
Member
Thread Starter
#19
CF Veteran
I would recommend looking into the 3.5" metalcloack lift with OME leaf springs. It's a nice quality and complete short arm lift. Kinda wish I went that route. I think I'm gonna grab their coil springs. A couple guys on the forum have the lift and are super happy with it.
#21
Member
Join Date: Nov 2015
Location: STJO MO
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
#22
Member
Thread Starter
Thanks. They are actually a 5 spoke american racing wheel.
I would recommend looking into the 3.5" metalcloack lift with OME leaf springs. It's a nice quality and complete short arm lift. Kinda wish I went that route. I think I'm gonna grab their coil springs. A couple guys on the forum have the lift and are super happy with it.
I would recommend looking into the 3.5" metalcloack lift with OME leaf springs. It's a nice quality and complete short arm lift. Kinda wish I went that route. I think I'm gonna grab their coil springs. A couple guys on the forum have the lift and are super happy with it.
Not sure ill see if I can find the box it came in. I had it in the evo to monitor everything.
#23
Member
Join Date: Nov 2015
Location: STJO MO
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
I looked at the metal cloak lift. I like them a lot. I just can't justify spending that much on a lift for a 210k mile jeep. I'll probably keep it on the cheap and regret it LoL
Not sure ill see if I can find the box it came in. I had it in the evo to monitor everything.
Not sure ill see if I can find the box it came in. I had it in the evo to monitor everything.
http://www.autoanything.com/suspensi...FQiKaQodb1EIwQ
Found the gauge:
http://ultra-gauge.com/ZC/index.php?...products_id=94
#24
Member
Thread Starter
Yep thats the gauge!
Im looking at a trail master or something similar. I may just save up for the RE3.5 kit. I don't want to do an addaleaf setup. I prefer to just swap out the entire leaf spring.
Im looking at a trail master or something similar. I may just save up for the RE3.5 kit. I don't want to do an addaleaf setup. I prefer to just swap out the entire leaf spring.
Pickup a Superlift 3" kit, its a great value for the money.
http://www.autoanything.com/suspensi...FQiKaQodb1EIwQ
Found the gauge:
http://ultra-gauge.com/ZC/index.php?...products_id=94
http://www.autoanything.com/suspensi...FQiKaQodb1EIwQ
Found the gauge:
http://ultra-gauge.com/ZC/index.php?...products_id=94
#25
Member
Thread Starter
#26
Member
Thread Starter
#27
Member
Thread Starter
Ive also been working on a little project. Not sure how it will work out though.
A jeep in the JY was next to an Escape No Boundaries addition. Well I snagged the roof rack off of it to see if I could retrofit it to the jeep. Had to grind off a bit of the front of the runners. The problem is the deflector shield is cracked and Ill have to repair it. It also says "ESCAPE" really big across it. Not sure what Im going to do about that.
A jeep in the JY was next to an Escape No Boundaries addition. Well I snagged the roof rack off of it to see if I could retrofit it to the jeep. Had to grind off a bit of the front of the runners. The problem is the deflector shield is cracked and Ill have to repair it. It also says "ESCAPE" really big across it. Not sure what Im going to do about that.
The following users liked this post:
JeepWoman (04-21-2020)