98 XJ 4.0/AX15 5 inch lift build
Ive got a 2 inch bb on now and plan on getting a 3 inch lift to add to it. I know i need extended brake lines, sye/driveshaft, control arms, adjustable trackbar, and shocks. Is there anything else i need? I have a few questions though. 1. Do i need new upper control arms? 2. Will a front xj driveshaft fit with my ax15? 3. Are shims a must have?
|
You will probably want ucas or your caster will be way off, no an xj shaft won't work with ax15 and sye I've heard 5.2 zj shafts might, you will need shims most likely
|
Originally Posted by kyle96xj
(Post 3211931)
You will probably want ucas or your caster will be way off, no an xj shaft won't work with ax15 and sye I've heard 5.2 zj shafts might, you will need shims most likely
|
Originally Posted by nchsa1120
(Post 3211954)
Ok thanks for the info. Would you happen to know the measurement for the caster with that much lift? If not do offroad shops that do alignments set the caster up? |
All times are GMT -5. The time now is 10:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands