Originally Posted by StuckBuck
(Post 3363253)
Lookin good! Ya that's some decent rust. I think you should go for the rat rod look lol :grin:
|
6 Attachment(s)
Installed some 2 inch AALs today and removed the rear sway bar. While i was back there i found some more rusty goodness :lol: I also found why the back was sagging so much thanks to some broken leaf springs! Tomorrow im heading to the junkyard so i might grab some leaf spring packs to rebuild mine. Im also going to finish lifting the front tomorrow and install my rear shocks, if i have time tomorrow after all that i might start trimming up my fenders and throwing on some 31s :sorcerer:
Attachment 304419 Attachment 304420 Attachment 304421 Was 100% sure i was going to find a hole in the frame here but after i took the pic I chipped away at it and surprisingly its solid underneath! Attachment 304422 Here is how she looks now next to my buddies massive wrangler lol Attachment 304423 Attachment 304424 |
Originally Posted by onew1ckedxj
(Post 3363677)
|
7 Attachment(s)
Finished installing my budget boost over the weekend! also ran to the junkyard and got a new bumper and some interior pieces (still have to put them on)
Attachment 304381 Attachment 304382 Attachment 304383 Of course i had to test the flex out :icon_cheesygrin: Attachment 304384 Attachment 304385 Attachment 304386 Attachment 304387 |
1 Attachment(s)
|
^^^WOW huge improvement! Looks awesome! That's a good color combo.
|
Originally Posted by StuckBuck
(Post 3364397)
^^^WOW huge improvement! Looks awesome! That's a good color combo.
|
5 Attachment(s)
So today i decided to tackle one of the many issues this jeep has . . When i bought it the PO had said the passenger side window motor was bad and he had taped it up to keep it from getting wet inside. Well i took it all apart today and here is what i found . . . .
Started by removing the door panel Attachment 304372 Attachment 304373 Once i could peer inside the problem became evident! although there was much more i had yet to find Attachment 304374 After unbolting the window, motor, and track i pulled everything out and found that the worm gear was completely pulled out, so from here i pushed the worm gear back through the tubing and reinstalled the housing back onto the motor Attachment 304375 Now i had read a few threads about the plastic teeth wearing off on the bracket that holds the window onto the track and this was indeed the problem causing the window not to work, its also why the worm gear had come completely out. So i removed the area of the plastic teeth and drilled out some holes and reattached the bracket to the worm gear via cotter pins Attachment 304376 Once i had the bracket reattached to the worm gear i reassembled everything and tested it out to find that i now had a fully functioning window!! :) |
4 Attachment(s)
Also got around to cleaning up and painting the bumper i pulled from the junkyard
Attachment 304368 Attachment 304369 It probably wont be on for long though, i got some brackets free from a friend that i will use to build my own Attachment 304370 Attachment 304371 |
Nice work with the window. I had to do that on my drivers side. Not my favorite job. The lift looks good.
|
Looking great, keep up the progress!
|
Originally Posted by cbs_24
(Post 3364731)
Nice work with the window. I had to do that on my drivers side. Not my favorite job. The lift looks good.
|
Originally Posted by chipmaker
(Post 3364736)
Looking great, keep up the progress!
|
12 Attachment(s)
Decided to tint my tails and markers today! also painted the grill and headlight buckets, id say it came out pretty nice! :sorcerer:
Attachment 304347 Attachment 304348 Attachment 304349 On the jeep! Attachment 304350 Attachment 304351 Attachment 304352 And since it was nice out i decided to give it a little photo shoot! :D Attachment 304353 Attachment 304354 Attachment 304355 Attachment 304356 Attachment 304357 Attachment 304358 |
Looking good! I would suggest painting the flares black. Would give it a nice little offset. And get some front bumper caps!
|
All times are GMT -5. The time now is 06:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands