97 XJ Cherokee BUDGET BUILD NW,INDIANA
08-15-2011, 02:06 AM
#3
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Portage,Indiana
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
well i kinda did not like the old faded flares so i took the off.so i said to my self if i cant add the lift right now I might as well get ready for it.So i went ahead an got some cans of truck liner an some cutting blades for my grinder an went to work......
not that bad but il have to clean it up soon!
not that bad but il have to clean it up soon!
08-15-2011, 02:12 AM
#4
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Portage,Indiana
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
then a bit more.....
cut the rest off...
then lined it... driver side had some hidden rust
will fix an add mor liner laterz
an in the end....
then i went to get dirty haha..
cut the rest off...
then lined it... driver side had some hidden rust
will fix an add mor liner laterzan in the end....
then i went to get dirty haha..
08-15-2011, 01:58 PM
#6
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Portage,Indiana
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
this i can do
the jeep has a hp30 in the front an Chrysler 8.25 rear.
did a tune up with bosch platinum spark plugs
and the jeep has 180.xxx miles but that did not stop me to take her on a trip to Louisiana with a 2500 trailer.
an as for options on the jeep there is but only one.. power mirrors.
i also put a yellow top battery in there as well as clean the engine bay a bit.
then i took of the rear bumper caps an added a Wilson 2000 cb antenna + Uniden Bearcat Pro PC68XL .
all that is left now is to change the wheel hubs in the front.. heres a photo of the engine bay when i was done.
08-15-2011, 08:28 PM
#7
Banned
Join Date: Oct 2009
Location: West Springfield, MA
Posts: 2,231
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
unless your popping in a high tech ignition system i would slap some champion coppers back in her it will run better may not seem that way right away but 4.0's are tempermental about spark plugs i have several instances where i got people to switch back and they thanked me...and even if you did high tech ignition i would run champion platinums not bosch...
Bosch= german cars
Champion= chrysler
Autolite/ Motorcraft= Ford
NGK= japanese
ac delco= gm
Bosch= german cars
Champion= chrysler
Autolite/ Motorcraft= Ford
NGK= japanese
ac delco= gm
Trending Topics
08-15-2011, 08:57 PM
#8
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Portage,Indiana
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
unless your popping in a high tech ignition system i would slap some champion coppers back in her it will run better may not seem that way right away but 4.0's are tempermental about spark plugs i have several instances where i got people to switch back and they thanked me...and even if you did high tech ignition i would run champion platinums not bosch...
Bosch= german cars
Champion= chrysler
Autolite/ Motorcraft= Ford
NGK= japanese
ac delco= gm
Bosch= german cars
Champion= chrysler
Autolite/ Motorcraft= Ford
NGK= japanese
ac delco= gm
i know what your talking about.. heaving problems with it all ready ....going to stop at the auto zoo tomorrow an get some new plugs for it.
08-25-2011, 12:06 AM
#11
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Portage,Indiana
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
Well got some tires from the good old junk yard. There not m/t's or a/t's just bfg long trail t/a's but they are 31x10.50x15s an are a lot bigger then the little 27 incherz I have right now.
