96 xj build
#94
Senior Member
Thread Starter
Join Date: Feb 2010
Location: errrvre where
Posts: 681
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
thanks man. im goin up to 35s. but im havein trouble finding people to mount and balance them. no one will do it haha. still lookin around for a shop. in the meantime in getting it reregisterered either today er tomarrow. then itll be streetable! still trying to find time to pop in the hack n tap and ds.
#95
Junior Member
Join Date: Sep 2011
Location: Pine Hill, NJ
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
thanks man. im goin up to 35s. but im havein trouble finding people to mount and balance them. no one will do it haha. still lookin around for a shop. in the meantime in getting it reregisterered either today er tomarrow. then itll be streetable! still trying to find time to pop in the hack n tap and ds.
u can mount them on ur own. its a little harder to pop the bead back on, but u can do it..
#96
Senior Member
Thread Starter
Join Date: Feb 2010
Location: errrvre where
Posts: 681
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
ok so its been a really long time but im deffinatly back at this. alot of **** has been going on lately. i pcsed to vegas and i drove my jeep down here. i couldnt not outsource to another car. all updated news
35's are on, new waterpump is in again, trimmed up the fenders
lookin at recovery bumpers from venders on this website.
new steering, a whole new WJ breaksystem is on the way at somepoint,
new fuel lines are on the way.
replaced the waterpump AGAIN! and it still squeels.
35's are on, new waterpump is in again, trimmed up the fenders
lookin at recovery bumpers from venders on this website.
new steering, a whole new WJ breaksystem is on the way at somepoint,
new fuel lines are on the way.
replaced the waterpump AGAIN! and it still squeels.
#98
Senior Member
Thread Starter
Join Date: Feb 2010
Location: errrvre where
Posts: 681
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
havent updated this in a while. work is a huge time killer but i had the chance to go out last sunday of some adventure time in the badlands of NV.
and the newest to add, i got rid of my eyesore of a sub box and decided to order and install hellraisers box.
this sub packs more of a punch then my friends 12s!!
and the newest to add, i got rid of my eyesore of a sub box and decided to order and install hellraisers box.
this sub packs more of a punch then my friends 12s!!
#99
Senior Member
Thread Starter
Join Date: Feb 2010
Location: errrvre where
Posts: 681
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
talk about bringing an old post back from the dead
got alot of stuff accomplished since the last time i updated.
.both front and rear bumpers
.rocksliders
.8.8 swap disk brakes and lsd
.regeared to 4.56s. alittle slow on the highway but i like them
.removed the rear interior and installed a rubber floor after painting the floor. im very supprized to see what little rust was on there.
.magnaflow and a highflow cat installed.
.sand job on those horrific white stripes. they are still there but im getting ready to paint them soon.
.both front and rear bumpers
.rocksliders
.8.8 swap disk brakes and lsd
.regeared to 4.56s. alittle slow on the highway but i like them
.removed the rear interior and installed a rubber floor after painting the floor. im very supprized to see what little rust was on there.
.magnaflow and a highflow cat installed.
.sand job on those horrific white stripes. they are still there but im getting ready to paint them soon.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)