Originally Posted by Schatty
(Post 719748)
|
Originally Posted by pickles
(Post 1075675)
What are you doing in b.c for the whole summer??
And damn I want a home built front bumper!! |
21 Attachment(s)
soooooooo i haven't updated in a while, but now i'm gettin down to business this summer and doin a major overhaul:beta1:
heres where i'm at as of now, over the summer and fall i finished my rear bumper got bushwacker flat flares 32x11.5 all terrains and a jba header to replace my cracked one and some daystar sway bar bushings to replace my worn loose ones. heres some pics of the progress Attachment 382456 on the way to whistler Attachment 382457 my place for the summer Attachment 382458 last pic before she got the cutting wheel Attachment 382459 clearing room for the flat flares Attachment 382460 yayyyy new tires 32x11.5 all terrains Attachment 382461 then i got back home to moose jaw and got my new tires Attachment 382462 put on some Christmas lights Attachment 382463 the jeep lookin classy Attachment 382464 Attachment 382465 Attachment 382466 Attachment 382467 i need a locker Attachment 382468 replaced the cracked header with new jba one Attachment 382469 in progress of changing Attachment 382470 more progress Attachment 382471 Finally droppin in Attachment 382472 new daystar sway bar bushings Attachment 382473 Attachment 382474 Attachment 382475 Attachment 382476 and finally this is how she sits |
now i decided the 4.0 is tiered and needs a break as well as my transfer case needs a rebuild and the diffs could use some love soooooo this summer i've got some plans
4.2l Stroker yet to be broken down to a specific part for part list remove the a/c and find a delete pully since i never use it upgrade the cooling system to keep the new engine happy with a high flow water pump and less restricting thermostat housing from hesco thor cowl induction intake to keep her breathing happy(still debating) i might go with a snorkel instead replace and renew the front dana 30 replace the dana 35 with a jy dana 44 with a lockright locker and zj disc conversion and install a slip yoke eliminator with new drive shaft when rebuilding the transfer case and the thing i'm most looking forward to is running 100% royal purple in everything engine, cooling system, tranny, transfer case, diffs, power steering fluid alllllll around let me know what you guys think and comment away |
looks awesome man!
|
i was just lookin back and wowww its been crazy before
https://www.cherokeeforum.com/member...-25th-2010.jpg after http://i1178.photobucket.com/albums/...p/IMG_0321.jpg |
You sure did a good job. I like your plans for it. I wish I had the funds to do it. Would love a stroker engine.
|
Originally Posted by Bimmer_2002
(Post 1557436)
You sure did a good job. I like your plans for it. I wish I had the funds to do it. Would love a stroker engine.
after the performance is done i'd like to do a front end 97-01 clip swap and some fresh paint (maybe desert tan) and powder coat my bumpers and roof rack i might strip the interior this summer and do rubber flooring and a custom center console out of steel with some fresh buckets from salvage and reupholster the back seat all ideas but i have to finish school first |
Sounds good!
|
Where did you get the JBA header?? And what did it cost ya?
|
Originally Posted by pickles
(Post 1568177)
Where did you get the JBA header?? And what did it cost ya?
|
Nice Cherokee man!
Where you in Whistler in February or? You should come back this summer, and ill come up for a weekend and we'll go for a rip and talk Jeep! Btw, i'm craig-b on PB. |
Originally Posted by craig-b
(Post 1579069)
Nice Cherokee man!
Where you in Whistler in February or? You should come back this summer, and ill come up for a weekend and we'll go for a rip and talk Jeep! Btw, i'm craig-b on PB. |
fails
9 Attachment(s)
ssssooooooooooooooooooooooo
im back at it for a bit figuring what parts i need and starting to rip it apart a few things i done that i found some pictures of for you guys that i did and forgot about Attachment 371942 Attachment 371943 flywheel bolts were loose and grinding so pulled them out and put in some new ones with red locktight... i will replace the fly wheel this summer when the trannys out since the holes aren't round anymore:001_unsure: Attachment 371944 the nss fix i pulled it off and re greased with dialectic grease since the springs werent pushing out the paws anymore (no after picture) Attachment 371945 Attachment 371946 yuck the thottle body was gross so i spent some time and cleaned it up.... and now Attachment 371947 that was the last little while and yesterday i started on this Attachment 371948 Attachment 371949 Attachment 371950 the drivers side is easy as its only surface rust but the passanger side needs a bit of patching followed by the whole floor covered in a sealer to prevent further rust so that will keep my busy for a while. plus the dash is out and the a/c is gone custom dash and center consel is in te works :gunsmilie: |
lol
5 Attachment(s)
so currently i have on order brown dog motor mounts since i could see how tilted my engine was but didn't look to for into it until this morning when i when to go see how bad my mounts were....................:oops:
Attachment 371937 Attachment 371938 Attachment 371939 Attachment 371940 Attachment 371941 currently my engine is being held up by the housing for my distributor :icon_eek: good thing its there or my engine would be grinding on the road:tt2: so i gave brown dog a call and there shipping the engine mounts to go with the motor mounts so its allllll gooodd |
All times are GMT -5. The time now is 08:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands