94 xj build (no name yet)
09-10-2013, 01:55 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2013
Location: Wichita, Ks
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
94 xj build (no name yet)
Well i figured i would throw my jeep build on here for some ideas. Its a 94 2 dr xj. It has the 4.0 backed with a ax-15 and 231j. Dana 30 and 35. Looking for a few ideas. Already have my lift and tires picked out RC 6.5 long arm with kumho 33x12.5x15's on Cragar Black D Window Wheels. Looking for any other ideas ya'll want to throw out for paint schemes, interior, and exterior mods. I'm leaning toward a zombie theme because i've alays loved the looks of a few trucks in my area that have the same scheme. I'll post up pics of it as is when i get off of work tonight.
09-11-2013, 01:07 AM
#2
Junior Member
Thread Starter
Join Date: Aug 2013
Location: Wichita, Ks
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Well put pics in my album, first thing i plan on doing is fixing the giant hole i have in my passenger side floor pan (spans from the foot area all the way back to the front brace of the rear seat and a hole under the rear seat) then rebuilding the transmission. then a lot more interior work, lift, ect. And finally a rattle can paint job after i strip all the old rattle can camo off. I'm thinking either od green, dark earth brown, or a desert tan like on some of our humvee's on base. WARNING.... this will be a slow build due to issues i have no control over. Also any idea's anyone has for me to try is more than welcome... always looking for different things add in to the mix
09-15-2013, 04:26 PM
#3
Junior Member
Thread Starter
Join Date: Aug 2013
Location: Wichita, Ks
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
well got my floor pan ordered, should be here tuesday. Did some upkeep on the xj this weekend, oil, filter, plugs, ect. seafoamed the motor and it turns out i have a few exhaust leaks that i was unaware of. Also noticed the temp took for ever to get to operating temperature so got a new fail safe tstat installed. And cleaned up the throttle body.
09-29-2013, 05:18 PM
#4
Junior Member
Thread Starter
Join Date: Aug 2013
Location: Wichita, Ks
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Slow progress. I have the floor pans almost completely back in but a quick question, the piece of metal that separates the little cargo storage area under the back seat from the front pans.... Is it a structural part of anything? i ask because i had to cut it out due to rust that spread to it and i can't find anything that references anything about that little piece. nor where to buy a new one or how to fab up a new piece.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)