94 XJ aka Randy!!
 

Well after gettin tons of info from the site and reading half the build threads I suppose I'll start my own.

Started with a stock 94 Country edtion. This Jeep hasn't ever been wheeled just drove from what I could tell. It has some issues with rust and lots of oil leaks but I've got most of them fixed for now.

Here's Randy the day I got him
Attachment 346708

Hey Jeep twin!

Attachment 346706

That's what it looked like when I first picked it up last October.

Now its a little different.
Attachment 346707

As soon as I got it I couldn't wait to take it out so I did a little wheelin stock. This is my first jeep rig and it supprised me. But trying to follow 35's thru a rut didn't work out so well.

Attachment 346704
Attachment 346705

Nice Ride Skittle

Parts Started to come in!!

Attachment 346703

Tires mounted.
Attachment 346702

The nightmare begins. About every bolt on this thing was rusted and broke while I was taking it apart. Total I've got 2 weeks of workin to get the lift on.

Heres some of the lift in progress.

Attachment 346701

I'll post up some more tomorrow when photobucket isn't being crap. :cursing:

Front is done. Now onto the rear. Attachment 346654

The rear I got a little lucky. All the shock bolts came right out. I had one stubborn front leaf mount bolt that broke the weld nut inside the frame. I had to take the rear seat out and drill a hole in the floor board to get a bolt and nut on it.

Little man helped! Attachment 346653

I still have a few things to take care of like the broken bolt in the frame at the crossmember, fix a rusted rear brake line and alignment.

Next up will be SYE, 4.56's front and rear with lunch box locker in the rear.

Next winter I plan to upgrade to long arms and 35's.

This is the best pic I could get from now.

Attachment 346652

Well I'm not much into doing build threads so I know this thread has been kinda lame so far.

Thought I would update on what my plans are.

I found a Dana 44 out of a old xj with the tow package. The rear axle is already set up with 4.10's and a locker so I'm going to throw that in as soon as i can get some money for a ring and pinion for the front.

Hope to get started on fabing some bumpers, sliders and a exo cage, although the cage will most likely be a winter project.

Stay tuned I hope to make this build a little more interesting within the next few weeks.

I did get to take the jeep out on it's first adventure after the lift and tires. managed to snap a u joint and the outer shaft on the driver side of the dana 30. I've upgraded to the bigger spicer joints and shafts out of a 98 xj.
Attachment 344032

Looks like a nice rig!