I pulled the rubber flooring out of my xj today
http://a2.sphotos.ak.fbcdn.net/hphot..._2649548_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot..._4372365_n.jpg

and I test fit a ZJ center console that im going to install
http://a4.sphotos.ak.fbcdn.net/hphot..._6768103_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...8_700335_n.jpg
What do you guys think/

well they are better than my

I like the ZJ console, may have to steal that idea. All the levers line up?

The ebrake and t-case lever line up but I have a colum shift so I dont know how your gear shift lever will lineup

I didnt get alot done today, I pulled some more plastic pieces out pulled out some wiring from when it was a plice rig sorry I didnt take any pics of that.
I also test fit the ZJ center console with the front seats its kinda tight but it fits
http://a6.sphotos.ak.fbcdn.net/hphot..._4080351_n.jpg
and I think I want to put my cb here
http://a1.sphotos.ak.fbcdn.net/hphot..._4708889_n.jpg

I went to the junkyard today to try and find a seatbelt for my drivers seat but no luck all they had were a couple of twodoors.
I took a wire brush to some of the rust
http://a5.sphotos.ak.fbcdn.net/hphot...8_619692_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot..._8156736_n.jpg
and it turns out I need to trim the center console alittler bit because the its getting pushed over my the passinger seat and the ebrake handle is rubbing.
http://a3.sphotos.ak.fbcdn.net/hphot..._4647528_n.jpg

Well i've just about the inside of my jeep ready to be painted with por15 then I can hurculine it.
http://a2.sphotos.ak.fbcdn.net/hphot..._5272469_n.jpg

Hey Shane! Looks like your starting to have fun now! Lookin good keep up the good work man!~

Thanks man its slow going for now but it is fun

Sorry its been a couple days since i've posted an update and all i've done is paint my floor pan with some por15
http://a2.sphotos.ak.fbcdn.net/hphot..._5999164_n.jpg
I plan on getting some hurculiner for it in the next couple of days

In my opinion, the GC console needs to go. You've got a rare column shift with just the coverings for the tcase shifter and the ebrake lever. I'd make something to put cups in where a floor shifter would be (or close) and use everything else that came with it. Also, why not put the rubber floor back on over the por15?
I love the jeep though. I had a column shift in my first yj and loved it. I'm super jealous. :cheers:

I plan on keeping the stuff that came with it but i still plan on trying to fit the zj center consol in but the tunnle is quite differant and my jeep has water leaks so I dont want to have water get the rubber flooring so i prefer the hurculiner. I didn't like the column shift at first but im liking it on the trail.

I got some hurculiner for my jeep today, and I did a little prep work so I can hurculine it tomorro such as use a wire brush in the corners and vacume up the mess, plus I took a damp towle and wiped all the dust off. I plan on applying the hurculiner tomorro if we have some sun.

I got my hurculiner rolled on today :gunsmilie:
Attachment 49014

Attachment 49015
how does it look?

I got a free grill guard with a winch mount but its for a s10 fo I have to figure out how im going to mount it.

http://a5.sphotos.ak.fbcdn.net/hphot..._1812938_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot..._6325880_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot..._7056839_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot..._7430870_n.jpg