|
DELETE
.
|
well its been such a crummy rainy weekend that I didnt bring my camera with me anywhere.
I picked up stock wheels and tires, so I'm rolling on tires that arent flat. I also picked up s10 leafs for my bastard pack and already cut the eyes off. Today I went and finished getting everything for my paintjob, because its been misserable and wet. http://i269.photobucket.com/albums/j...d/CIMG1525.jpg for those wondering, the $50 paint job, costs closer to $65 paint tray kit $7.88 3 1'' foam brushes for trim $1.08 blue painters tape no residue $5.77 2 qts of rustoleum $17.96 5 high density foam rollers $8.97 mixing tub $1.67 gallon of mineral spirits $9.97 3m 220 grit 5 pack x 2 $ 3.94 hand sander $4.64 sub total - $61.88 tax - 4.95 Total - $66.83 new ubolts and centerpins http://i269.photobucket.com/albums/j...d/CIMG1524.jpg 3'' rc 8000 shocks got the shocks today http://i269.photobucket.com/albums/j...r/CIMG1533.jpg stock height http://i269.photobucket.com/albums/j...d/CIMG1530.jpg Rear bastard packs done rear lift http://i269.photobucket.com/albums/j...r/CIMG1537.jpg new dif clearence http://i269.photobucket.com/albums/j...r/CIMG1538.jpg still need to instal spring clamps and shocks http://i269.photobucket.com/albums/j...r/CIMG1539.jpg didnt bring my digital camera today because I wasnt going to work on it, frustrated it was 90 again ect. Ended up working on it, header panel off http://i269.photobucket.com/albums/j...agejpeg_0S.jpg front dif almost out http://i269.photobucket.com/albums/j...agejpeg_0E.jpg front dif out http://i269.photobucket.com/albums/j...agejpeg_0H.jpg sittin on the ground http://i269.photobucket.com/albums/j...agejpeg_0J.jpg pic of approx height after front lift give or take a bit http://i269.photobucket.com/albums/j...agejpeg_0D.jpg yanked the header panel off the parts jeep http://i269.photobucket.com/albums/j...gejpeg_0HH.jpg crummy pic, but new yj front and rear brake hoses http://i269.photobucket.com/albums/j...r/CIMG1540.jpg both jeeps have the 8.25 and 3.55 gears |
What are bastard packs and are they cheap? I have a 96 XJ Country and the rear is sitting low. Springs are worn and I want to put a lift on it but dont have alot of money.Where did you get the bastard packs and how do you put them on? Any help would be great . Thanks. By the way , its looking good.
|
Originally Posted by troy fritz
(Post 256696)
What are bastard packs and are they cheap? I have a 96 XJ Country and the rear is sitting low. Springs are worn and I want to put a lift on it but dont have alot of money.Where did you get the bastard packs and how do you put them on? Any help would be great . Thanks. By the way , its looking good.
Basically you take a chevy s10 or dodge dakota leaf pack (search around junkyards normally want too much, I paid 40$ off craigslist) And you cut the eyeholes off the end, so your left with a bunch of leafs. Now you mix and match the leafs with your xj leafs to get the desired amount of lift. All packs are different, there is no cookie cutter science. The beauty of it is you dont have to remove your xj main leaf, so it saves a ton of hassle. http://webpages.charter.net/laurajef...0_pack_PDF.pdf Dont hold me to this, but id say if the arch is nice on the s10 pack, just adding the s10 main as the number 2 spring (retain the rest of your xj pack) should grab around 2 inches of lift. I added the s10 first, third and helper spring and eliminated the xj 3rd spring and helper spring and got about 3 inches of lift. My s10 pack was from a 99 s10 2wd, and my xj springs were pretty worn. |
I'm sorry but I think that woulda been my parts jeep and I'd built the white one.. you got plenty of rust issues.. was the white one worse?? or not 4x?
|
Originally Posted by DieselDaze
(Post 258346)
I'm sorry but I think that woulda been my parts jeep and I'd built the white one.. you got plenty of rust issues.. was the white one worse?? or not 4x?
Not bad for my first jeep haha. Plan is to have sub 1800 into it all said and done. |
Originally Posted by The Bandit
(Post 256935)
I'll grab you some links
Basically you take a chevy s10 or dodge dakota leaf pack (search around junkyards normally want too much, I paid 40$ off craigslist) And you cut the eyeholes off the end, so your left with a bunch of leafs. Now you mix and match the leafs with your xj leafs to get the desired amount of lift. All packs are different, there is no cookie cutter science. The beauty of it is you dont have to remove your xj main leaf, so it saves a ton of hassle. http://webpages.charter.net/laurajef...0_pack_PDF.pdf Dont hold me to this, but id say if the arch is nice on the s10 pack, just adding the s10 main as the number 2 spring (retain the rest of your xj pack) should grab around 2 inches of lift. I added the s10 first, third and helper spring and eliminated the xj 3rd spring and helper spring and got about 3 inches of lift. My s10 pack was from a 99 s10 2wd, and my xj springs were pretty worn. |
i used leafs off of a 2000 durango. i used all the durango leafs except the top leaf. and i got rid of all the xj leafs except the top(needed the eyes to match up) and i got at least 3 inches bc with the 2.5 inch block im sitting at about 6-6.5
|
Looks like alot of work but shes coming along nicely
|
Nice build!
|
thanks! i totally forgot to update this,
well jeepfest was cool. Now that I understand it more, next year will be much more fun. Plus I should have this jeep there. DTPA sold me some tires and had Matt bring them to jeepfest for me. allowing me to pick them up and pay for them at JF. http://i269.photobucket.com/albums/j...r/CIMG1619.jpg http://i269.photobucket.com/albums/j...r/CIMG1617.jpg http://i269.photobucket.com/albums/j...r/CIMG1616.jpg Mithuth sold me this CB for a really good price :D http://i269.photobucket.com/albums/j...r/CIMG1614.jpg Stay tuned for the front axel, which should be going in soon, and tons of other updates that I now have planned. fast forward to tonight, I think I ordered an antenna, mount and cable for the cb. I say think because I just punched in my paypal debit card info into the site, hopefully they will just charge it like a normal credit card, this being the only form of plastic i have and all. I'll know tomarrow I guess :D. I also picked up new brake pads for the front and a new belt that i forgot to pick up when I bought everything else, thanks to that special someone forgetting the list at home. ah well she vacumed the jeep, it balanced out. |
I have a question on the bastard packs. Will springs from a 4x4 s-10 work? I have a set from a 4x4 and hope they will work.
|
Originally Posted by troy fritz
(Post 262306)
I have a question on the bastard packs. Will springs from a 4x4 s-10 work? I have a set from a 4x4 and hope they will work.
Nice build! |
good start keep up the pics
|
Originally Posted by troy fritz
(Post 262306)
I have a question on the bastard packs. Will springs from a 4x4 s-10 work? I have a set from a 4x4 and hope they will work.
Anyways I pulled the trigger on a cb antenna, mount, cable and spring, and it was insanely expensive thru walcott cb, apparently they are a trusted vendor so I used them i dunno. mount was over 20 cable was 25 antenna was a great deal 20$ for a firestik firefly 4' spring was another like million dollars. |
| All times are GMT -5. The time now is 12:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands