'90 Laredo DD/wheeler
#18
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
went to the junkyard to pull some sway bar links off another xj and get a pair of bastard packs.
ended up finding a skidplate off an 89 laredo and its sway bar links were stripped so they remained. but never got to the blazers before the place closed
will have the skidplate painted blue and on within the next few days between school and work, its gotta alot of clean up to do. its covered in half inch of dirt and grime. lol
ended up finding a skidplate off an 89 laredo and its sway bar links were stripped so they remained. but never got to the blazers before the place closed
will have the skidplate painted blue and on within the next few days between school and work, its gotta alot of clean up to do. its covered in half inch of dirt and grime. lol
#19
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
progressing with the easy stuff.
been a while, finals this week so work on the jeep was put on hold.
skid plate off and on after scraping clean and painting.
there was a flap the PO made to reinforce his wiring harness for the tow package. too bad he had to us part of the frame as the flap. had to drill holes and maneuver around it for the skid to fit.
and a close up of it mounted
went and picked up some lights. future roof rack build had been put on an even longer delay and needed some extra vision for trails.
skid plate off and on after scraping clean and painting.
there was a flap the PO made to reinforce his wiring harness for the tow package. too bad he had to us part of the frame as the flap. had to drill holes and maneuver around it for the skid to fit.
and a close up of it mounted
went and picked up some lights. future roof rack build had been put on an even longer delay and needed some extra vision for trails.
#20
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
also went and got all new LCA bushing from autozone. lets hope it solves the floorboard thumping when the steering wheel turns from dead center.
#21
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
so my camera was stolen and it had all my jeep photos on it, cool story right?
been doing minor things to get ready for hunting season.
roof rack- xmas present from parents
lights- two more in the center.
washed and waxed after rack went on, before center roof lights
been doing minor things to get ready for hunting season.
roof rack- xmas present from parents
lights- two more in the center.
washed and waxed after rack went on, before center roof lights
also have all new LCA and UCA bushings and TRE's (but photos were on the camera)
#22
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
been a while and need to update.
nothing new to it yet, have blazer bastard packs and neon injectors that are gonna go in when i have time. still looking around for zj v8 coils before i order new lift springs.
wheeled lake roosevelt a little. some mini shots and a video i havent figured out how to upload but may just post link,
nothing new to it yet, have blazer bastard packs and neon injectors that are gonna go in when i have time. still looking around for zj v8 coils before i order new lift springs.
wheeled lake roosevelt a little. some mini shots and a video i havent figured out how to upload but may just post link,
#26
Senior Member
Join Date: May 2010
Location: Nevada City, California
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2K
Model: Cherokee
Engine: I6 with Mustang fuel injectors; 60mm Throttle Body;
#27
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
went out the last two days while visiting my brother in Flagstaff, AZ. got it up on three wheels with the front sway bar attached. my phone was dead and i didnt bring a camera. give me a day or two ill get the photos off my brother's phone.
#29
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
door trim or paint?
so im contemplating whether i want to glue the door trim back on that has fallen off or just strip the entire car and paint where they would be.
it would be a charcoal gray or black. any imput?
it would be a charcoal gray or black. any imput?