nismo_2005

xjoffroad

did you seriously just spray paint over the lenses?

nismo_2005

it is a product call v.h.t. night shades it is spray on tail light tint. you can still see most of the light through it. it just makes them look darker. it is what the product is made for.

nismo_2005

got the fronts done. will getg pics soon. i also got some rust converter it is supposed to make rust into black primer that you can sand off. so i though why not it will work good on the surface rust on my grill shell and door. well it says paint safe so i sprayed it on and just wiped off the surounding paint. it turned tha paint around the rust wite (it did come off and the paint looks good just took some scrubbing) and it turned the rust white and blue. so instead of making it less work to sand the rust it made it more work to clean it all up before i can sand it down and off. and the weather is lloking like rain again so i cant do my rockers anyway.

alfreado121

night shade is awesome!! i did my taillights and my corner

nismo_2005

yeah i did thails corners and the turn signals under the headlights

nismo_2005

well no pics but i cleaned the IAC and TB and now she isles better and dose not rev real high on start up. getting ready to go to autozone and see if my tre's are in

ruff88xj

your out of logan right? I was down at duabenmire's of off 664. They have a Gray 90 2dr that looked like they were in pretty good shape if your still looking for doors.

we need to meet up some time

nismo_2005

ill have to check it out. yeah ive got a crazy work schedule. but we should have a meet up sometime.

nismo_2005

ok i was going to order new rocker panels to weld in. but now im thinking about doing this. just cut out all the rust paint the jeep and put these on it.

http://www.quadratec.com/products/72538_20X_PG.htm

they come in black and i was gonna rhino line the exact area they cover anyway. so what do you guys think fix it like stock or go with the guards?

96_xj

In stead of putting down that much money on those go get. Some 2x5 from the steel yard in either the 3/16 or the 1/4 variety and weld it place of your rockers. Get skids and it looks cleAn

ruff88xj

What about welding in 2x4 box steel?

Edit: 96_xj beAt me to lol

96_xj

nismo_2005

you got any pics of it? cause that would be a nice double as sliders also.

nismo_2005

im guessing this is what you mean?
http://www.pirate4x4.com/tech/billav...rs/rockers.htm

it looks clean and would take care of my rust. looks like this is most likely the way i will go.