4x4 instalation
#1
4x4 instalation
Alright so I have a 93 jeep cherokee sport I have lifted it up 4.5 inches and run 31s for now but it's a 2wd I was going to keep it for camping trips etc. but now I want to make it a build and turn it into a 4x4 what would you guys recommend? Should I go with the build or just buy a 4x4 and continue on.
#2
Seasoned Member
Join Date: Jun 2011
Location: Cali
Posts: 334
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 L
Alright so I have a 93 jeep cherokee sport I have lifted it up 4.5 inches and run 31s for now but it's a 2wd I was going to keep it for camping trips etc. but now I want to make it a build and turn it into a 4x4 what would you guys recommend? Should I go with the build or just buy a 4x4 and continue on.
#3
Seasoned Member
Join Date: Aug 2011
Location: Michigan--> SOCAL--> Eastern Carolina--> Middle Tennessee
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01,01,99,98,97,97,96,94,90MJ,90MJ,86MJ
Model: Cherokee
Engine: 4.0
I just did a 4x4 swap into my 99 Two door, fairly straight forward and simple, i just bought a new tranny, i have a AX-15 in mine so i snagged a Ax-15 for 300$ and then a brand new in the box np231 for 140$ threw a SYE on it and after i finished with my engine build threw it all together and put it in, i decided to get boostwerks t case linkage which was a great investment, and for 50ish$ unbeatable. The only thing i havent done is the 4x4 pig tail for the transfer case to make the dash lights work.
#4
I just did a 4x4 swap into my 99 Two door, fairly straight forward and simple, i just bought a new tranny, i have a AX-15 in mine so i snagged a Ax-15 for 300$ and then a brand new in the box np231 for 140$ threw a SYE on it and after i finished with my engine build threw it all together and put it in, i decided to get boostwerks t case linkage which was a great investment, and for 50ish$ unbeatable. The only thing i havent done is the 4x4 pig tail for the transfer case to make the dash lights work.
#6
Newbie
Join Date: Oct 2014
Location: Central TX
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I converted my 96 zj to 4wd. I found a donor jeep that had a blown engine. I took all the parts needed trans/t-case, front diff., driveshafts, shifter, shifter plate. I believe i listed all the parts… Very simple task. Took a total of 12 hours to swap. I replaced all the ball joints, U-Joints, shocks, all rubber components while i was in there. I also reinforced the trans crossmember, because i intended to use this as a rock crawler.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
98JGC826
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2016 08:10 PM
carson
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 08:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)