Looks awesome

thanks! I redid my cargo area tonight so i can carry all my stuff with nothing out to bounce around or go flying in a rollover.

started with this
Attachment 357714

then went to this
Attachment 357715

and ended up with this
Attachment 357716
Attachment 357717
Attachment 357718

ohh and its doorless now!
Attachment 357719

and ill take some pictures of the bumper tomorrow its too dark out now my camera sucks

Went wheeling today

heres some pictures of the bumper
Attachment 357602
Attachment 357603
Attachment 357604
Attachment 357605

One day headed back from wheeling which already went bad because my hub exploded my tire decided to fall off and roll down the road. well the weight of the jeep landed on the drum and bent it and everything inside the drum fell apart:brickwall: I was going to rebuild it but decided to just swap over to disks so i pulled a rear axle from a zj at the junkyard and swapped the brakes over
Attachment 357598
Attachment 357599
Attachment 357600

and one last picture from tonight
Attachment 357601

a video from wheeling a while ago this hill was impossible before the locker and boggers and my buddy had to give it all the gas he could to get up another time
http://www.youtube.com/embed/JJzBhoF4Cz0
i can not figure out how to make the video show up in the post sorry

So tonight i was bored and i had a broken tail light so i decided i was going to start building some quarter panel gaurds with built in tail lights this is as far as i got in under an hour
Attachment 356858
Attachment 356859

and i also found out i need a bigger truck
Attachment 356856
Attachment 356857

so when youre upper ball joint lets go you have a very big mess especially when it happens in the middle of a mud hole
http://sphotos-b.xx.fbcdn.net/hphoto...21621884_n.jpg
i had to do all kinds of fancy stuff to get home its a good thing it wasnt far ratchet straps and bailing wire are your friends
http://sphotos-a.xx.fbcdn.net/hphoto...90622232_n.jpg

the parts to fix this should be here soon then i can start working on the other stuff and get wheeling again

Got a winch for Christmas and stuffed it behind my bumper

I also modified the air box so it intakes out of the cowl. I sealed all of the holes in the box and used some RV sewer hose to go back to the cowl

Anyone got any suggestions or questions??

how much lift are you running now? and what is the size of the swampers? great looking rig!

Thanks!! I'm on 3 inches of lift running 33x12.5 boggers