2000 xj project "Onix"
 

Bought on 08/26 and fell in love on the way home. Took my Rockford Fosgate P2 12" outta my old car and installed it along with 4 Memphis Audio 5.25's and a Kenwood KMR-350U deck. Sounds great! Sound system CHECK


Attachment 144401



Attachment 144402



Attachment 144403

Attachment 144404

Put my tb spacer in today, my first ever engine modification :) hopefully first of many

Attachment 144405

Flagged it up, which I didn't notice, but my girly pointed out is slightly off center and now it's prolly gonna bug the **** out of me till I take it off and put a new on on :(

Flowmaster on, wouldn't call it an easy bolt on app though. The guy helping me cut the pipe short on accident and it leaked, took it to a shop and they popped an extra length in and welded it all purtty for $60 haha at least I tried. Sounds great, the force II kit comes with a series 60 delta, very subtle sound but still got some attitude.


Attachment 144406



Attachment 144407

Got the AEM intake in, heat shield was a pain and didn't line up right AND the bolts were crap. Ended up using one AEM nut, one factory bolt and leaving the other hole empty. Also I have a TB spacer so I had to drill a hole in the heat shield to put the rubber mount higher... The pipe rubs a tiny on the hood so I got a small bike tube patch on the under side on the hood till I can grind off the lil bump that it's touching.


Attachment 144409

Pulled off the side molding on my lunch break :) gonna repaint em along with front and rear plastics


Attachment 144412



Attachment 144413

Came off easy, used a tie wire to start it then noticed it was scratching the lil bump so I stopped and grabbed some weedeater string and used that. Worked great!! Gonna buy some penetrating oil on my way back to work for the bumper bolts and spray em good for a couple days before trying those off

Nice to see another silver XJ! Real clean. Check my build if ya want.

Hook it up with a link

Nevermind I found it haha. Badass man, love the two tone, and the smoked rear lights and side reflectors. You do that yourself?

Damn, now I wanna paint the lower quarter of the whole thing :( think ill just stick to the molding for now haha. I can always just sand the lower doors, front and rear bumper and tape and paper everything else off later

I smoked the tail lights myself. I got the side lenses off of eBay.

many on here say throttle spacer and cold air mod are useless. especially the spacer

Yeah it's all bed liner on the rockers and quarters

What where the lens called? I think I'd rather buy them then do them... My tail lights on the other hand in gonna do up with vhr night shade along with the front runnin lights

Eh spacer probably is but f it already bought it and modded my intake to fit it. The intake ( which is not CIA btw, just a high proformace) combined with the Flowmaster ha givin a nice boost. Where I would usually be boggin out up a hill it just cruses