|
2000 xj in indiana
3 Attachment(s)
So I am slowly building my rig starting with a 2000 stock xj. Since I bought it last year, I have had to put all new tires on it. Along with radiator, inter cooler, alternator, water pump soon ill be replacing my head (within next two weeks). I recently bought a 3 inch suspension lift from Zone and going to be installing it soon and throwing on a set of 31x10.50x15 bf Goodrich tires on. I also have a set of wheel spacers on the jeep and have taken my fender flares off. This is all just a start. I'll update as I make progress.
|
Another 00! Woohoo! Can't wait to see how your build unfolds. Good luck with it!
|
3 Attachment(s)
Started to lift my baby :) driver side shock and spring done. I'm including pics at roughly the same angle of before and after
|
2 Attachment(s)
Front is done :)
|
Well haven't updated for a little bit so I figured i should. My lift has come to a halt while I replace my head. I'm ready to pull the head tomorrow then over the next week or so while I'm waiting for it to come in, I'll be cleaning the engine and continuing with the lift.
|
Where you at in Indiana? (If it says, I can't see it, I'm on the app)
|
Originally Posted by DieselD
(Post 2360519)
Where you at in Indiana? (If it says, I can't see it, I'm on the app)
|
Finally got my head pulled and ordered. Now to clean the engine and put the rest of the lift on while I wait for it to arrive
|
Originally Posted by acewingman89
(Post 2360701)
I'm in east central Indiana. Between Indy and Richmond.
Originally Posted by acewingman89
(Post 2368278)
Finally got my head pulled and ordered. Now to clean the engine and put the rest of the lift on while I wait for it to arrive
|
Originally Posted by DieselD
(Post 2368329)
Cool. I'm right by 465 and W.Washington Sounds like a plan. |
Originally Posted by acewingman89
(Post 2368278)
Finally got my head pulled and ordered. Now to clean the engine and put the rest of the lift on while I wait for it to arrive
|
Originally Posted by acewingman89
(Post 2368504)
Right on. Maybe when I take my trip to haspin acres you can join me Lots on my to do list. Bet for sure when I'm up and running again. |
Originally Posted by NewJerseyXJ609
(Post 2368574)
Was your jeep a crack head?? |
So I got my new head today :) and I looked at the old one again and there was a crack in it
|
Well. The head is put back in and prolly 70% of the engine is reassembled. Have to wait on a new rocker arm bolt tho. I kinda snapped on by having my torque wrench set a little too high :/
|
| All times are GMT -5. The time now is 12:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands