2 door build thread
So I purchased a Cherokee a few months back and since things are kinda slow moving right now I figured I'd catch up and make a build thread. I'm new to the wheeling and off-roading world as well as jeeps so any advise, info, or anything to help move me in the right direction would be greatly appreciated. I'll attach pictures as I go but I started out with a 94 2 door xj I bought for 700 bucks off craigslist in running and driving condition. I knew the floors were rusted pretty bad so I removed all the carpet and seats. I also was told the oil pan gasket needed replacing so I got on that and boy was that a pain in the you know what. So far I haven't really put anything aftermarket on it yet but I did pick up a set of steel wheels that needed some cleaning up so I decided to completely refinish them and bedline them. I want to keep this thread rolling so I will update as often as I can and again please any and all help would be greatly appreciated:icon_lol:
|
https://cimg9.ibsrv.net/gimg/www.che...719c2d086.jpeg
The day I got her in my drive way the paint job looks like spray paint so I'm planning on raptor lining the whole thing after I get a new rear hatch and fix the driver side door https://cimg2.ibsrv.net/gimg/www.che...3d65f5b08.jpeg Replaced rear diff seal and found out i have a Chrysler 8.25 and since it is a 94 I'm thinking it's the 27 spline version but I don't know how to tell the difference https://cimg8.ibsrv.net/gimg/www.che...1cd9fe5c2.jpeg LAfter the seats got removed and before the nasty carpet got trashed https://cimg5.ibsrv.net/gimg/www.che...d91a001a6.jpeg LYay rusty floors just what everyone loves to see https://cimg7.ibsrv.net/gimg/www.che...5a9f71ca7.jpeg Passenger side is much much worse |
https://cimg6.ibsrv.net/gimg/www.che...75d3f7760.jpeg
Small rust hole in the trunk no biggie to be fixed soon https://cimg6.ibsrv.net/gimg/www.che...4be35ca05.jpeg More rust around rear wheel well anyone have any tips on fixing this??? |
https://cimg9.ibsrv.net/gimg/www.che...76b20e278.jpeg
Picked a set of 15x10 steel wheels off craigslist for a good price need some work to get them lookin good again https://cimg6.ibsrv.net/gimg/www.che...62dc7af43.jpeg Sticks out 3 and 1/4 inches from the fender flare but I'm planning on taking the flares off and trimming the fenders https://cimg1.ibsrv.net/gimg/www.che...3cd2fa187.jpeg Primer on the backside of the first wheel I did the auto primer worked really well https://cimg3.ibsrv.net/gimg/www.che...0113bb2b8.jpeg Wheel face primed after priming I really saw the spots I missed with the wire wheel so I got that back out hit the spots I missed and re painted https://cimg4.ibsrv.net/gimg/www.che...763a26aff.jpeg The finished product I'm very happy with the results picked up some stock bumpers to slap on too that will be Bedlined as well |
All times are GMT -5. The time now is 12:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands