1999 xj project
 

I got this project jeep a few months ago. Other than needing a motor, its in pretty nice shape. My plans so far are-
New motor, better bumpers, remove the door trim, fix some dents and repaint the whole thing, and then swap out the complete interior because i dont like the tan thats in it now. Im considering a two inch lift because i did that on my daily driver 98, and have been pretty happy with it so far
https://cimg5.ibsrv.net/gimg/www.che...e5fb1d59d2.jpg

I like the tan 2 tone interior in my black '00. If they don't break coming out or are not already damaged might be interested in a couple pieces if you decide to sell them.

Send me a message about the pieces youre looking for and ill see what i can do

The pillars over the front door down to the dashboard if you can manage to get them off without breaking any of the clips behind them. Just so you know. Pretty sure it can't be done.
The parts running along the bottom of the front doors. Assuming the ends are not all cracked and the collars the screws go in are solid. Almost always not.
The sills at the bottoms and tops of the cargo areas. Again there are clips behind the top one that like to break off like with the pillars. Also the bottom sill is usually trashed too.
Would have to be in near perfect shape though. I have already sourced most of these in better shape.
The pillars on mine I just glued the clips and it can't be seen but...
Same with the upper cargo sill.
The lower sills along the front door I grabbed a couple in decent shape but need to glue back on a couple collars that the screws go in underneath. But the fronts are not cracked like they get.
And the lower cargo sill I just bought a new one of but since that takes a real beating would not mind having a spare.
Shipping would be to 06795 and I can pay with PayPal

Chili Pepper Red FTW! I also have a '99 and a '98. Both Chili Pepper Red. I also took the door trim off the '98, looks so much better. I put this lift on the '98 (https://dpgoffroad.com/product/2-5-u...mu-hybrid-kit/). Really nice quality. I just wanted to get everything right the first time. I am in Aldie, VA. Maybe I'll see your Chili Pepper red XJ sometime. My wife drives the '99 all the time in Gainseville. It still needs the front fenders painted after the accidents and rebuilds (https://www.cherokeeforum.com/f2/reb...-apron-226647/). If you see a Chili Pepper red XJ with grey front fenders in Northern VA, you'll know who's it is.

Ive been pretty busy lately, so haven't been on here to update. Since my last post, ive sandblasted and painted the brake drums and fender brackets, fixed a bunch of small dents on the jeep, removed the door moldings and fenders, and am in the middle of getting the newer motor ready.
https://cimg0.ibsrv.net/gimg/www.che...0f674c9a41.jpg
https://cimg7.ibsrv.net/gimg/www.che...90d80a72f8.jpg

https://cimg4.ibsrv.net/gimg/www.che...da0df6ef51.jpg