1998 Sport Build Thread (Pic Intensive)
So about 3 weeks ago my parents surprised me with a 1998 Cherokee Sport
https://www.cherokeeforum.com/member...0-img-3429.jpg They realized that this is what I really wanted and they started searching for me, and when i got a 4.0 in school this year they decided to make the plunge and buy it for me. I havent put any new mods or anything on it, I have replaced the Brake calipers and washed it a lot. :brows: I have also cleaned under the hood in the engine compartment just recently (today actually lol) https://www.cherokeeforum.com/member...3-13-20-22.jpg Future Upgrade (hopefully Soon) will be: 3" Rough country Series Lift kit w/ 1" block in front and 1" shackle in back 32" tires (not sure with brand, suggestions welcome) C.B. Radio, antenna mounted drivers side hood Custom front/rear bumpers w/ subframing roof rack 4 mounted lights on top of roof 2 mounted lights on front bumper 1 built in light in rear bumper for those tailgaiters :lol: Stay tuned for more here are some more pictures: https://www.cherokeeforum.com/member...8-16-44-59.jpg https://www.cherokeeforum.com/member...8-16-45-17.jpg https://www.cherokeeforum.com/member...2-img-3431.jpg relatively clean since it only had one owner since 98. I love being the second owner! |
Today i worked on the Jeep. I first started out by cleaning the engine with some degreaser i bought down at my local parts store for around 3 bucks. Used the whole can and the outcome was pretty darn good:
https://www.cherokeeforum.com/member...3-13-20-22.jpg Than after that i bought this back to black stuff to put on my oxidized flares, body trim and bumpers. It worked out pretty well: Here is what i used, and what i applied it with. https://www.cherokeeforum.com/member...3-17-44-45.jpg https://www.cherokeeforum.com/member...3-17-44-56.jpg The outcome to me looks amazing! Well a lot better than it did. Here is some before and after pictures: Before: https://www.cherokeeforum.com/member...0-img-3429.jpg After: https://www.cherokeeforum.com/member...3-17-40-26.jpg Before: https://www.cherokeeforum.com/member...1-img-3430.jpg After: https://www.cherokeeforum.com/member...3-17-44-32.jpg Stay posted, might be ordering lift next week hopefully. |
Scored a CB Radio today from my neighbor. Practically brand new. Its a radio shack has all original parts and is awesome! Havent installed yet.
https://www.cherokeeforum.com/member...7-22-01-56.jpg https://www.cherokeeforum.com/member...7-22-02-05.jpg |
1 Attachment(s)
If you have an overhead console, you should install it into that like i did. Great place, keeps it up and out of the way, looks clean, and easily accessible.
|
So today i got a call from a friend who works at the wrecking yard and he told me they had just got in a gas tank skid plate in great condition. So i bought it and they only wanted 20$ for it. I was in awe. So these are the before pictures. Before all the cleaning brushing sanding and painting. Looks way better now. I will take pictures of the finished product tomorrow!
https://www.cherokeeforum.com/member...-56-35-472.jpg https://www.cherokeeforum.com/member...3-56-23-54.jpg |
So just 5 minutes ago i ordered my lift kit!!! I ordered a BDS 4.5" Short arm lift kit. I added on some goodies to the base kit. The things i aded on were the fox 2.0 series shocks and the 5500 single steering stablilizer. Heres the link to the site and the lift kit i got! I am so excited should hopefully be here soon and will be on the jeep before school starts! Lemme know what you think! I have worked my A$$ off this whole summer for a lift kit and finally made the commitmnet. Cool thing about this lift kit is that it is 100% made in the USA! thanks for looking http://bds-suspension.com/product?ma...8&yr=1987-2001 CLick on the little box to get to the site, there should be a table in the upper right hand section area that you can push to select the 4.5 SA lift
|
Ok so as promised here are some pics of my CB and how i mounted my CB/antenna and ran my wire from the passenger side rear to the front.
https://www.cherokeeforum.com/member...1-p9108058.jpg I mounted my antenna https://www.cherokeeforum.com/member...2-p9108059.jpg Than drilled a small hole for my wire, and ran the wire alonf the upper trim of the jeep https://www.cherokeeforum.com/member...3-p9108060.jpg than... https://www.cherokeeforum.com/member...4-p9108061.jpg Mounted my cb..nothing to it :) |
Ok so today my dad and I drove up to Vancouver, WA to body and armour to pick up my bds lift kit! Here are some of the pictures i have from the trip.
https://www.cherokeeforum.com/member...4-p9108039.jpg https://www.cherokeeforum.com/member...5-p9108040.jpg https://www.cherokeeforum.com/member...7-p9108052.jpg https://www.cherokeeforum.com/member...8-p9108050.jpg https://www.cherokeeforum.com/member...9-p9108053.jpg https://www.cherokeeforum.com/member...0-p9108055.jpg https://www.cherokeeforum.com/member...5-p9108065.jpg So excited and cant wait to put this bad boy on!! Please leave comments/feedback/tips thanks for looking :) |
|
https://www.cherokeeforum.com/member...2-pa018281.jpg
https://www.cherokeeforum.com/member...3-pa018282.jpg https://www.cherokeeforum.com/member...4-pa018283.jpg https://www.cherokeeforum.com/member...5-pa018290.jpg https://www.cherokeeforum.com/member...8-pa018308.jpg https://www.cherokeeforum.com/member...0-pa018316.jpg https://www.cherokeeforum.com/member...1-pa018320.jpg My neighbor who is helping me https://www.cherokeeforum.com/member...2-pa018322.jpg https://www.cherokeeforum.com/member...3-pa018323.jpg https://www.cherokeeforum.com/member...4-pa018324.jpg |
|
https://www.cherokeeforum.com/member...5-pa098470.jpghttps://www.cherokeeforum.com/member...1-pa098346.jpg
https://www.cherokeeforum.com/member...2-pa098352.jpg https://www.cherokeeforum.com/member...3-pa098356.jpg https://www.cherokeeforum.com/member...4-pa098361.jpg https://www.cherokeeforum.com/member...5-pa098378.jpg https://www.cherokeeforum.com/member...6-pa098397.jpg https://www.cherokeeforum.com/member...7-pa098404.jpg https://www.cherokeeforum.com/member...8-pa098408.jpg https://www.cherokeeforum.com/member...9-pa098421.jpg https://www.cherokeeforum.com/member...0-pa098426.jpg https://www.cherokeeforum.com/member...1-pa098428.jpg https://www.cherokeeforum.com/member...2-pa098429.jpg https://www.cherokeeforum.com/member...3-pa098440.jpg https://www.cherokeeforum.com/member...4-pa098442.jpg https://www.cherokeeforum.com/member...5-pa098452.jpg https://www.cherokeeforum.com/member...6-pa098457.jpg https://www.cherokeeforum.com/member...7-pa098460.jpg https://www.cherokeeforum.com/member...8-pa098465.jpg https://www.cherokeeforum.com/member...9-pa108477.jpg https://www.cherokeeforum.com/member...0-pa108479.jpg https://www.cherokeeforum.com/member...1-pa108482.jpg https://www.cherokeeforum.com/member...2-pa108488.jpg https://www.cherokeeforum.com/member...3-pa108493.jpg |
Painted the Wheels on the jeep today with dupli-color truck bed liner turned out pretty darn good
https://www.cherokeeforum.com/member...4-17-01-47.jpg |
1 Attachment(s)
|
All times are GMT -5. The time now is 12:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands