I do not know how to do that on mobile, but Kieth, I will send you a pic via text tonight... is that okay? assuming your number hasn't changed....lol.... PM me if it has.
|
nope number is still the same. Ill check first thing tomorrow when I get to work I have a bunch of specialty tools and I think I have some tamper proof allen sockets
|
where do i get the rear bumper?
|
Originally Posted by Dan440hemi
where do i get the rear bumper?
http://www.logansmetals4x4.com/id8.html |
4 Attachment(s)
Okay, so I thought thr front looked a little bland, so I added some lights. PIAA. Not sure if I am 100% thrilled with them yet, thinking they look a little small. So I may have to spring for the 6" lights and move these 4" lights to another spot I have in mind.
But what does everyone else think? Attachment 379507 Attachment 379508 Attachment 379509 Attachment 379510 |
Sweet jeep. But on the lights of you got the coin for some bigger and a idea for the small ones.. Go big.
|
Originally Posted by APLaBrie
Sweet jeep. But on the lights of you got the coin for some bigger and a idea for the small ones.. Go big.
I called the off road store I bought them from. They told me its only a few bucks more for the 6" lights, so I ordered those and will exchange these and pay the difference. They are not cheap, so no point in just buying another set .... lol.... I will get pics up this weekend when they come in. Then eventually I will get these again for the "other" spot. ;) well, maybe. We'll see. Lol Then... Next week, the floor boards will be fixed, my front driveshaft will be repaired, and my exhaust leak corrected. Exciting times! Then off to Rausch Creek the following weekend to see what else is weak and needs replaced. ;) |
think you should go bigger on the front lights Think KC's would look sick!
|
I am going to stick with the PIAA's up front because they have better road manners, (and I plan to use them to suppliment my high beams), AND I have four KC HiLITES for the top anyways.... LOL.... But I am definitely going bigger. Think 6" will work, largest "driving" light allowed anyways....
Then perhaps I can get moving on getting the 6x9's on the roof too... we will see. So much to do, so very little time!(and money) LMAO |
4 Attachment(s)
Okay, so for those of you who have kept up with my build. Here is a little story. A few weeks back, I joined the PA Cherokee club on a wheelin' trip to Rausch Creek. Once again, (and I mean the third time in less then 9 months) I broke my front u-joint on my front drive shaft! This is frustrating as each time, I swear we fixed it right. WELL, apparently, tracing back to the first incodent, I found the broken piece. The little teeth on the yoke that hold the caps fo the u-joint in place actually broke, and therefore it was inevitable!
SO, we wrapped the end caps in electrical tape and screwed them in as tight as we could. Then we wrapped the whole assembly in Duct tape. Basically making a "redneck" CV joint. Then I hit some harder trails, some rocks, and buried it in a mud hole. At the end of the day, that thing held! Here is a picture of what it looked like after five hours of wheelin' with it this way..., Attachment 379450 Then I jumped on the freeway and drove it home. IT was no longer balanced, so it vibrated like a siv, but it got me home. But due to the hour, I was too tired to remove it. Long story short, it stayed there for the last three weeks. AND STILL HELD. So when someone says duct tape fixes anything.... they are right! NOW, that being said, I plan to go back up in a few weeks, so i had to fix it. I ordered a new heavy duty yoke for a Dana 44, and put that on. Glad I did too, cause when we looked inside the pumpkin, seems I also filled the diff with mud and gunk, so it was like a chocolate milkshake in there! HAHAHA.... But final result? Here is what it looks like now! Attachment 379451 Attachment 379452 Attachment 379453 I couldn't decide which pic I liked best, so I posted all three. Anyways, those have U-bolts to hold it together! So yea, I plan to prove, I am not going to be the first guy broken again! HAHAHAHA The whole assembly was only 60 bucks, wish I knew, I spent more then that in u-joints over the last year! HAHAHA |
2 Attachment(s)
Okay, So i exhanged those 4" PIAA Lights for the 520 series 6" lights. And I think they look a million times better, what do y'all think?
Attachment 378976 Attachment 378977 |
Yep they look much better
|
2 Attachment(s)
Tore the carpet up today to prep for minor repairs... think I should address this? LMAO
Do you think Duct tape can fix this one? LMAO |
Duct tape will fix that for sure. lol. Nice looking Jeep man. I really like how you kept the two-tone look with the fenders and bumpers. Good Job.
|
thank you. I appreciate that other people appreciate the look I am going for. ;)
|
All times are GMT -5. The time now is 11:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands