1992 cherokee build
2 Attachment(s)
First hello to the forum been a member for a while, mainly just seeing what everyone is up to with there builds ect. So how about a little background on me, mostly ive only had pickups as 4x4 but since i wanted more of a adventure vechile for weeked trips ect ,i decided to get something with more interior room. That is how i ended up with my project jeep xj/cherokee, i payed 500 for it since it wouldnt run properly (turned out to be a bad coil) so ya turns out i may have overpayed lol. I knew it was going to be a long project a little longer since i didnt have anywhere to work on it for the first year ended up in my gf parents driveway
so these are pics from the the ad Attachment 344800 Attachment 344801 so it was a bit rough but had what i wanted which was 4 doors never wheeled and has the ho 4.0L here are some random pics of my heap http://i1279.photobucket.com/albums/...psc5817df9.jpg http://i1279.photobucket.com/albums/...ps4a29ad86.jpg http://i1279.photobucket.com/albums/...psc2bbb7de.jpg http://i1279.photobucket.com/albums/...psc54e8a4b.jpg http://i1279.photobucket.com/albums/...ps437fece5.jpg http://i1279.photobucket.com/albums/...ps066f0a7a.jpg and well the last one shows the state of one of the plugs lol |
how much did you pay for this jeep?
|
i payed 500 for the jeep.A friend from work lent me half of his garage so i could do some of the more involed parts of this project, i knew the jeep had rust issue since the rockers where done. i pulled the carpet and this is what i found
http://i1279.photobucket.com/albums/...ps480c7a78.jpg http://i1279.photobucket.com/albums/...ps81b1a5ab.jpg http://i1279.photobucket.com/albums/...psaae88855.jpg http://i1279.photobucket.com/albums/...ps0269966a.jpg http://i1279.photobucket.com/albums/...psde60b20b.jpg so i decided the floors where done so i ordered new ones from rock auto heres some pics http://i1279.photobucket.com/albums/...ps3a5698be.jpg http://i1279.photobucket.com/albums/...ps15f0ee6d.jpg http://i1279.photobucket.com/albums/...ps8a26d1ca.jpg http://i1279.photobucket.com/albums/...ps649ec22a.jpg the kick panels had some bad rust spots so they had to get replaced to |
so here pics of the new floor
http://i1279.photobucket.com/albums/...ps43b17823.jpg had to replace this part on both side since the metal was so bad,ahh i love rust http://i1279.photobucket.com/albums/...ps0d7e4b0a.jpg http://i1279.photobucket.com/albums/...psc06d227b.jpg http://i1279.photobucket.com/albums/...psa6bd6e19.jpg http://i1279.photobucket.com/albums/...ps46ae19ff.jpg also i planned on doing the 2x6 rocker replacement so firgued i woould gut those since they where falling out anyway http://i1279.photobucket.com/albums/...psbfd62860.jpg http://i1279.photobucket.com/albums/...psf195130f.jpg as it stands now the floor is almost all welded in i just have to finish the seams underneath and clean up the welds. I bought all the the steel for the 2x6 rockers but will have to wait till i install the ruffstuff stiffners,and i have been holding off on that till i got this in http://i1279.photobucket.com/albums/...ps5c8d2ee1.jpg more progress to come, feel free the let me know what u think thanks |
well since iam home sick figured id work on my build page, add some pics and kinda lay out my plans for my jeep.Here is the list of what i have already for the jeep
frame stiffners: I went with ruffstuff since well they seem to me the only ones i could get in canada and i had to drive to bc to get them brown dog motor mounts: ordered them Awsome customer service,was a problem with the order and they went the extra mile to sort it out and make sure i was happy with the order,plus they look freaking awsome would defiently recommend them bds 6.5 la lift kit: ordered and recieved kit,i wanted the long arm for the better ride quality ect plus cant go wrong with the warrenty Things i plan on getting/doing: rollcage: i was considering doing a exo but since i can get a kit for around 500 firgured it made more sense. that and the old lady said there was no way she would drive it with a exo hmmm which might be a plus front and rear aftermarket bumpers: input on these would be appreicated, not completely sure which style i want to go with id like to keep the weight down but still have something that can take some abuse rebuild t-case: jeep came with a np 242, what does everyone think of this t-case? worth rebuilding or is there a better option? stroker engine: ya that will be a while exhuast: thinking borla header and magnaflow muffler intake : later model u shaped intake with a bbk 62mm throttle body neon injectors slip yoke eliminator kit: any recommendations ? i will be changeing the rear axle out, had a line on a dana 44 but the guy sold it on me before i could get there with sucks. I still considering what to do for this, but think i might just search all over for another one blah blah blah u get the idea iam sure will post all update as they happen |
time for some more random pics (yes iam bored out of my mind)
http://i1279.photobucket.com/albums/...ps5ea147e3.jpg underneath with the floors cut out http://i1279.photobucket.com/albums/...psa80dbc5e.jpg preping to remove engine trans and tcase http://i1279.photobucket.com/albums/...ps3289af06.jpg http://i1279.photobucket.com/albums/...psa9baa215.jpg http://i1279.photobucket.com/albums/...pse043ef92.jpg got it all out wasnt a big deal to remove all as one and gave a alot more room for welding read up on the heat issue under the hood and went to every jy in edmonton and could not find any lebaron vents so when i spotted a daytona turbo vent i grabbed it cost me 20 bucks http://i1279.photobucket.com/albums/...ps767fed08.jpg cut the hole for it (funny thing shouldnt have done this at 2am was a little tired and that resulted in this ) http://i1279.photobucket.com/albums/...psc4c91e94.jpg so ya i cut through the hood release cable which is why i will be doing hood pins:whistling2: here is how it looks with the vent in http://i1279.photobucket.com/albums/...ps692d4c4b.jpg http://i1279.photobucket.com/albums/...ps89bad227.jpg and underneath http://i1279.photobucket.com/albums/...ps776dd862.jpg i still have to finish up by welding mounts underneath ect and yes the vise grips turned into the hood release |
All times are GMT -5. The time now is 08:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands