1990 expo/hunting build
3 Attachment(s)
Picked up a 86 xj last year to start a build but after I got it tore apart realized there was way too much rust to put any money into. Also have an 85 GMC that I have been driving but wanted a better daily driver plus I like the jeep platform. This week bought a 90 xj from a friend for $500. He said fuel pump or relay was out cause it wouldn't start. Pulled it home on trailer and as I was unloading it off the trailer saw the plug to the fuel pump hanging. Plugged it in and it cranked right up.
This weekend I did all the usual tune up, plugs, wires, and oil. Also changed water pump and thermostat. Plans are: Flex fan Radiator 3" lift 31x10.50 bfg km2 Build bumpers and roof rack Paint Cargo area drawer Attachment 309974 Installed gauges to replace dummy light gauges Attachment 309975 Installed cold air intake Attachment 309976 |
4 Attachment(s)
Cleaned up the interior and decided to build a cargo box from the plans in the fab forum.
First built a jig for the box Attachment 309970 Here it is tacked and test fit Attachment 309971 All welded up Attachment 309972 Ready for paint Attachment 309973 |
Congrats on the score and the easy fix. I like the box, nice work. But the "cold" air intake...you do realize that the air it will be using is just hot air from the engine bay, right?
|
1 Attachment(s)
Originally Posted by jay_sco
(Post 3224820)
Congrats on the score and the easy fix. I like the box, nice work. But the "cold" air intake...you do realize that the air it will be using is just hot air from the engine bay, right?
Today made a basket that fits on the driver side of he cargo area where the factory spare goes. This will be used to hold tow straps and other recovery gear. Attachment 309964 |
2 Attachment(s)
Worked on the cargo area this morning. Got box and basket mounted and built a platform for storage underneath.
Attachment 309939 Built a tray that slides underneath for tools but still haven't put the dividers in it yet. Still have to built the tray for the other side Attachment 309940 Also ordered my lift from Rustys Offroad. Went with the 3" AAL kit. Can't wait for it to show up. |
1 Attachment(s)
Lift showed up today. Will probably put it on this weekend. Also got a new fan clutch to replace the worn out factory one.
Attachment 309888 http://i288.photobucket.com/albums/l...6B6547465B.jpg Am also in the process of building a roof rack do should have it done in the next couple days. |
2 Attachment(s)
So put the lit on today. Took a few hours but everything went pretty smooth. It was a chore getting the rear tires off. They had been on there so long that wheel had rusted to the hub so had to pry the wheel away from the hub.
Attachment 309814 Here is the finished project. I put some 30x9.50 tires that I had from my other xj that I am going to use until I get some new wheels and tires. Attachment 309815 |
1 Attachment(s)
|
I like that roof rack design a lot - never thought about using the existing captive nuts, now where is my welder...
|
Originally Posted by Brock2013
(Post 3225951)
Worked on the cargo area this morning. Got box and basket mounted and built a platform for storage underneath.
http://i288.photobucket.com/albums/l...63549C4E04.jpg Built a tray that slides underneath for tools but still haven't put the dividers in it yet. Still have to built the tray for the other side http://i288.photobucket.com/albums/l...FE71C28DFC.jpg Also ordered my lift from Rustys Offroad. Went with the 3" AAL kit. Can't wait for it to show up. |
2 Attachment(s)
Originally Posted by Martlor13
(Post 3231532)
Why aal and not new leafs?
This past weekend I had a few problems. I broke my fan shroud while putting a new fan clutch on and just zip tied it up to be able to use it but while on my way home from work, the shroud hit the fan and broke and poked a hole in the radiator. So I got a new radiator and hoses and got them out in. I also changed out the thermostat while I was there so I could get the cheap Murray stay out and put in the Stant superstat that I had ordered. After I got that sorted out it was back to the fun stuff. I got some LED light strips from Amazon and put in for interior lights. I also mounted a couple quick fist clamps to hold my axe in the cargo area. Today I plan on mounting a couple led 18w flood lights on the back of the roof rack and tracking number says adjustable track bar and new steering stabilizer is supposed to show up today. Here is some pics of the lights Attachment 309543 Attachment 309544 |
All times are GMT -5. The time now is 05:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands