|
1990 Cherokee Rebirth
In 1995 I moved to NC from VB, and quickly went native. It all started joining some friends on an annual WINTER trip to WV to got wheeling and camping in the mountains. First year I went, took Dad old full size 2wd Dodge PU truck. Well, I quickly learned, that wont do. In 1999 I purchased a second hand 1990 Cherokee 4x4 Laredo. I was hooked. It was dead stock, but performed well. In 2004 I relocated to Roxboro, NC for a new Job, bought a Dodge Dakota In 2009 I bought a new house, and took Jeep off the road with intentions to rebuild it with my son. It had a freeze plug leak, and it Sat for a couple years. A year later I pulled motor, had to bore it out 60 over, and rebuilt mostly stock. The built motor sat on engine stand till last month. I put it back in jeep, fired right up and that's where this build starts.
https://cimg6.ibsrv.net/gimg/www.che...be468471b5.jpg When I first got it https://cimg0.ibsrv.net/gimg/www.che...fc69252f14.jpg First trip to the Mountains https://cimg4.ibsrv.net/gimg/www.che...9f09edb608.jpg Lots of mud, https://cimg7.ibsrv.net/gimg/www.che...547332af62.jpg Fully loaded with 4 good size Dudes https://cimg0.ibsrv.net/gimg/www.che...401a3daa2d.jpg Seems to like the mud https://cimg3.ibsrv.net/gimg/www.che...07d161f7ce.jpg Pulled that log down the shore. https://cimg9.ibsrv.net/gimg/www.che...916c8d2117.jpg Redneck $15 Headliner https://cimg2.ibsrv.net/gimg/www.che...1eb8801bee.jpg Perfect fit Then I Bought house, and pulled motor.. https://cimg1.ibsrv.net/gimg/www.che...e39f4d28ba.jpg Several years later...Motors in https://cimg8.ibsrv.net/gimg/www.che...18c7aebbe4.jpg She's Alive https://cimg8.ibsrv.net/gimg/www.che...8fd4587f8a.jpg Present day, suspension https://cimg8.ibsrv.net/gimg/www.che...e232f7ea9b.jpg New Everything https://cimg7.ibsrv.net/gimg/www.che...7dc6ee393d.jpg Adding 2 inch spacers, with my $12 bump stops https://cimg8.ibsrv.net/gimg/www.che...e98118085f.jpg Let the fun begin. |
|
Well, Go the the new fender liners in from Rockauto 12 bucks a side, and bedlined flares and made hardware. Now Im trying to bring back to life wheels. I need to button up front to move on to back. New Springs, shackals, brakes and shocks ready to go in. I think I managed to save wheels
https://cimg0.ibsrv.net/gimg/www.che...a05bc09b6f.jpg Before https://cimg1.ibsrv.net/gimg/www.che...f1f2a55ea6.jpg After |
https://cimg2.ibsrv.net/gimg/www.che...c2c1082ea2.jpg
New intake in https://cimg3.ibsrv.net/gimg/www.che...e0b55d5e0e.jpg Had to tap out hole for oil breather and canister line https://cimg4.ibsrv.net/gimg/www.che...4f5990fdbc.jpg Clears hood.. just barley. https://cimg5.ibsrv.net/gimg/www.che...94a3d88602.jpg Front done. Flared bed lines, and inner fender liners in. Manged to save the wheels.. Now for 2nd battery and rear end.<br/> |
Before moving to rear, went ahead and upgraded Electrics. Replaced Fusible links with fuse box, Then added second battery, replaced all main lines with #4 and #2 wire. Selector switch, and fuses. Even got Electric Antenna replaced. Front Suspension.. Done, Wiring.. done.. now to rear. New Springs, Shocks, and brakes.
https://cimg6.ibsrv.net/gimg/www.che...05ea81a0c2.jpg Moved EGR solenoid and Fan relay. Installed stock battery tray in reverse on Driver Side. https://cimg7.ibsrv.net/gimg/www.che...f38bd74f71.jpg Mounted Battery selector switch to firewall. Was going to put in Center console, but opted not. https://cimg8.ibsrv.net/gimg/www.che...2e9aa1c8f4.jpg Fused Alternator at 250, Battery's 500 each. Replaced Fusible links with real fuses. https://cimg9.ibsrv.net/gimg/www.che...caf1cf3c86.jpg #2 wire aint cheap.. https://cimg1.ibsrv.net/gimg/www.che...09ce229fd5.jpg 500 Amp on each battery.. Winch says it needs 475. Should be good. |
Today I tackled rear springs, I thing I grew two more balls today. It wanst as bad as it could have been, but I was a major PITA. I watched and read all the how to's, and alot of people talked about red thread locker on bolts. There wasn't any of that, but the first three threads on each bolt had a notch cut in it. Created a barbed hook type grip. For those of you who have done this job.. hats off to ya, I feel like I have earned my wrench badge on this one. Any way, now Im going to power wash and paint before installing new shocks and brakes... btw anyone have a problem with rear shackle rubbing tail pipe? I have the dynomax exhaust. Time for a percocet and a cocktail
https://cimg1.ibsrv.net/gimg/www.che...209881bb83.jpg look how flat the 26 year old springs were. https://cimg3.ibsrv.net/gimg/www.che...876d2aa842.jpg I went with the Dorman 939 301 up county OEM replacement springs, and 2 inch shackles. With Extended shocks https://cimg5.ibsrv.net/gimg/www.che...e920d2c220.jpg I am sooooo glad that job is done |
Looks great! I bought the same Jeep new in 1990 although mine was black with a red interior. Had it until 1996 ... and wish I still did. Good luck with your build!
|
Thanks..
Thanks, I appreciate that. Im still wondering what sadist at Jeep decided to notch the threads on those bolts. I mean it worked, they never came loose on the road, but they pretty much laughed at my impact gun.
|
How is the noise with the driver's side intake? I did basically the same thing and have a lot of noise now
|
Well, really haven't had it on the road, but the short drives I have taken I cant tell a difference. I think the inline filter helps with that.
|
Progress
Light bar Install 240000 lumens... Yes 240000, LIke having sun on roof. Rear suspension Done.. now for interior
https://cimg0.ibsrv.net/gimg/www.che...80d9c7c032.jpg Hit me with those purple retina burners one more time https://cimg1.ibsrv.net/gimg/www.che...b811749429.jpg Made a light bar out of 1.4 steel and some old spring bushings cut in half. https://cimg2.ibsrv.net/gimg/www.che...ca7241454f.jpg Shop Dog approves https://cimg7.ibsrv.net/gimg/www.che...29d42e16a8.jpg New Spring, shocks, and brakes, then undercoating. went with Crown 901's and 2 inch shackles. |
Cool build man, where did you get those fuse blocks from?
|
Amazon, just search for ANL fuse holders, all kinds. I got l like 3 for 12 or 13 bucks. The fuses are cheap too from Amazon. Get a dozen for 12 bucks, VS $5 each at store.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 |
https://cimg3.ibsrv.net/gimg/www.che...ae34c9ad55.jpg
Wifey recovered overhead console.. Matched Factory interior perfect. Fender Flares, and Console... yup She's a keeper |
Driver side Cowl Intake
Had a good rain today, and even though I havent had Jeep on road yet, I got a little paranoid about water being driver side cowl is open. So, I made a screen for hole in cowl, and covered opening directly over intake. Anyone else who has done driver side cowl intake, I wold love some words of wisdom as to weather you have a problem
https://cimg0.ibsrv.net/gimg/www.che...306b2de135.jpg with water. The black and large red pieces are just holding it until rtv dries. The red ring has a screen in it. https://cimg1.ibsrv.net/gimg/www.che...b9a853413b.jpg Cut up and old Tupperware lid, and silicone to underside of cowl vent over intake opening. |
| All times are GMT -5. The time now is 04:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands