Originally Posted by lliwxj98
(Post 1744136)
2wd Jeep with a v8 with the back chopped. Or 2wd Jeep 4.0 with a supercharger
|
Originally Posted by outlawtr450
(Post 1744880)
manshee with ls swap
were you at advance today buying stuff for a 98 cherokee? i was in a 04 grand cherokee parked next to you if so |
Anybody have some good spots to wheel up at state college area? I'm going to be in the area close and needed some ideas on where to go around there and McVeytown.
|
Originally Posted by dquiles84
Anybody have some good spots to wheel up at state college area? I'm going to be in the area close and needed some ideas on where to go around there and McVeytown.
|
Originally Posted by thecrew2999
(Post 1745977)
were you at advance today buying stuff for a 98 cherokee?
i was in a 04 grand cherokee parked next to you if so |
Originally Posted by dquiles84
(Post 1746246)
Anybody have some good spots to wheel up at state college area? I'm going to be in the area close and needed some ideas on where to go around there and McVeytown.
|
Originally Posted by outlawtr450
(Post 1746806)
sure was about flipped on the guy when he told me they didnt sell diff cover gaskets haha
yeah i know. the dana 44 and dana 30 are probley the most common axels in the world yet ask them for a shim kit for setting up new gears they will tell you dealer only. i hate parts stores. in my experience you can only get about 50% of what your looking for. in example if you need the plastic bushing and rubber o ring for your trans cooler lines coming out of the trans or the clip for that matter, your sol. mind you they made about 1 - 2 million cherokees in automatic since the production start but there are parts you can only get at the dealer. |
Originally Posted by outlawtr450
sure was about flipped on the guy when he told me they didnt sell diff cover gaskets haha |
Originally Posted by bighouts5591
We had em for the 8.25 at pep boys for like 4 bucks. I haven't found one anywhere for a D30. I know fel pro doesn't make one |
Originally Posted by bighouts5591
(Post 1746959)
We had em for the 8.25 at pep boys for like 4 bucks. I haven't found one anywhere for a D30. I know fel pro doesn't make one
They had them both just had 2 tell the idiot how to do hia job and felpro def makes a dana 30 gasket... haha you can tell you worked at a parts store hahaha |
Originally Posted by outlawtr450
yea man im a half hour outta state when ya gonna be around we'll go for a ride i like your driving style anyhow!!! just watch out for those trees!!! |
Originally Posted by bighouts5591
If its near State College, I know it. But there's not much here, gotta do 30-40 minute drive to get to the good stuff |
any reason you want a diff cover gasket? i always use rtv.
|
i usually do also but my 8.25 is in rough shape need the gasket and rtv to get it to seal up well the rocks try and pull it off like a can opened
|
Originally Posted by Mrjw1996
anyone close to Carlisle, Pa...coming to the truck show this weekend??
|
All times are GMT -5. The time now is 07:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands