When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
North AtlanticMaine, New Hampshire, New York, Vermont, Massachusetts, Rhode Island, Connecticut, New Jersey, Delaware, Pennsylvania, Maryland, Washington DC
Holy **** that confused me for a second.... Garage talk app said new post from Nieeal... Open it up, and where the hell did the thread go?!? .....gt app has a separate tab for stickies
Any interest in this? Popped a freeze plug or head gasket, can't tell as of yet. Coolant is rust colored so more than likely head gasket. Still runs and moves on its own but pisses coolant.
1998
4.0
NP242
Chrysler 8.25 LSD
Hankook Dynapro 30x9.5
Front pads & rotors are 4 days old
Is anyone around the Philadelphia area...More like hour west of Philly? Or can point me in the right direction. I need a set of wheels and tires (stock) for my 1995 XJ. Took to get inspected and my 32s hang out by probably less than an inch in the front and right on the line in the back and they failed it. The guy said just put the spares on and bring it back and we will pass it. Problem is I do not have spares. Ive looked online around here and they are all young kids that wont answer my messages or texts. Not trying to spend an arm and a leg for literally a couple hours of being on the car. Thanks for any advice or direction.
Is anyone around the Philadelphia area...More like hour west of Philly? Or can point me in the right direction. I need a set of wheels and tires (stock) for my 1995 XJ. Took to get inspected and my 32s hang out by probably less than an inch in the front and right on the line in the back and they failed it. The guy said just put the spares on and bring it back and we will pass it. Problem is I do not have spares. Ive looked online around here and they are all young kids that wont answer my messages or texts. Not trying to spend an arm and a leg for literally a couple hours of being on the car. Thanks for any advice or direction.
I run less than the 3.75/4.00 backspacing most people run. Just because i use my Jeep mostly to cart my son around and don’t need entanglements from the police. I’m in York, we have a pretty good salvage yard down the road from my house and we have a Jeep dedicated salvage yard. Let me check their inventories.
My 32s barely stick out. Like so little that they are being overly dumb about it but I know its a pass or fail. So its whatever. I just found out my sister has a 2013 Hyundai Santa Fe sport that has the same lug pattern and if I did my math right should fit to get it passed. So I might borrow them. If not I will need something. I should know Saturday about that. Thanks for the heads up guys. But in the mean time. Probably smart for me to look for a set to have in the shed for future years. So if anyone is looking to sell cheap XJ wheels/tires. I am in.
It may have same lug pattern but does it have same wheel backspacing? What's the width of the wheel? Big enough to clear the brake calipers? Won't hit the knuckles or anything?
06-10-2018, 01:24 PM
