Maryland Cherokee Club
06-30-2017, 11:11 PM
Newbie
Join Date: Dec 2009
Location: 21050
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: V6
I'm in Harford County, Md as well.
I have a stock 2004 Grand Cherokee Limited 2WD...
The only thing done to it so far is Euro-style tail lights and an off-brand Ebay Cold Air Intake.
Any active groups still in the area?
Thanks!!
I have a stock 2004 Grand Cherokee Limited 2WD...
The only thing done to it so far is Euro-style tail lights and an off-brand Ebay Cold Air Intake.
Any active groups still in the area?
Thanks!!
07-31-2017, 07:39 PM
CF Veteran
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
Wow this use to be the most active forum on the site. Where did everybody go?
Anyway, long story short...Does anyone in the central Maryland or southern central PA area have a welder? Been fighting "Death Wobble" and am going to try the weld a washer over the egged out bolt hole for my track bar to eliminate that before swapping parts. Have a new track bar, a nice thick washer with the proper sized hole and a new bolt. Just need someone to weld it in place. Of course success or not I shall compensate whoever for their time.
Anyway, long story short...Does anyone in the central Maryland or southern central PA area have a welder? Been fighting "Death Wobble" and am going to try the weld a washer over the egged out bolt hole for my track bar to eliminate that before swapping parts. Have a new track bar, a nice thick washer with the proper sized hole and a new bolt. Just need someone to weld it in place. Of course success or not I shall compensate whoever for their time.
08-01-2017, 08:05 PM
CF Veteran
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
I could get the guy at work to weld it but don't trust certain people not to rat me out to corporate for getting my private vehicle welded on company time. The bastards.
08-04-2017, 01:30 PM
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Blew up my transfer case in the YJ, and I'm looking for some information on swaps.
It's a '93 YJ 4.0L, and I have a '98 TJ 4.0L NP231 behind it with an unknown SYE. (Thanks Pudgy, it lived a good life.)
I'm looking at getting a TJ NP231 with a super short SYE, or possibly getting an NP241 from a Rubicon if I find one.
Anything I need to watch out for, or any recommendations of things I should upgrade while I'm there?
It's a '93 YJ 4.0L, and I have a '98 TJ 4.0L NP231 behind it with an unknown SYE. (Thanks Pudgy, it lived a good life.)
I'm looking at getting a TJ NP231 with a super short SYE, or possibly getting an NP241 from a Rubicon if I find one.
Anything I need to watch out for, or any recommendations of things I should upgrade while I'm there?
08-06-2017, 08:38 PM
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
08-08-2017, 07:10 PM
CF Veteran
Join Date: Dec 2009
Location: Newport, pa
Posts: 2,820
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Granted, Nieeal is a better welder then me... And probably better then anyone on this forum... But I'm pretty good, I think Tim will vouch for me on that. I'm in South Central PA, about an hour from Baltimore. Maybe half an hour closer then Nieeal? I'd be willing to help you out if need be. But, another option (I did this before I swapped to the d60) is to drill the hole out bigger, and run a bigger bolt.
08-09-2017, 12:16 PM
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Blew up my transfer case in the YJ, and I'm looking for some information on swaps.
It's a '93 YJ 4.0L, and I have a '98 TJ 4.0L NP231 behind it with an unknown SYE. (Thanks Pudgy, it lived a good life.)
I'm looking at getting a TJ NP231 with a super short SYE, or possibly getting an NP241 from a Rubicon if I find one.
Anything I need to watch out for, or any recommendations of things I should upgrade while I'm there?
It's a '93 YJ 4.0L, and I have a '98 TJ 4.0L NP231 behind it with an unknown SYE. (Thanks Pudgy, it lived a good life.)
I'm looking at getting a TJ NP231 with a super short SYE, or possibly getting an NP241 from a Rubicon if I find one.
Anything I need to watch out for, or any recommendations of things I should upgrade while I'm there?
I bought a scion and took the jeep off the road.
10-19-2017, 07:50 AM
Newbie
Join Date: Oct 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Hey there- Kent Island , Md guy here - just got a 2008 , want to mod it lightly - can anyone recommend where I can get a 2" lift installed ? looking for other tips as well there doesnt seem to be a forum I can easliy look this up .
10-27-2017, 06:23 PM
CF Veteran
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
If you just want a 2" budget lift for the look and very light off-road use any moderately capable home mechanic can do it with basic tools. If you want a more substantial suspension lift there are a lot of local 4x4 guys who can help. I'll check into some
