Maryland Cherokee Club
#1486
CF Veteran
Join Date: Aug 2011
Location: New Market
Posts: 4,323
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by DocOrng XJ
so what do you do about pre 90 vehicles?
84-89 Cherokees?
they were also?
I have an old timers book with fitments and torque. 84-89 was 75ft lbs.
#1488
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Just got my V8 ZJ tie rod and my 'new' starter in the mail
..and Sal from SignWorX messaged me back, and he's mailing me a new set of stickers, no charge, cause I never got mine.
..and Sal from SignWorX messaged me back, and he's mailing me a new set of stickers, no charge, cause I never got mine.
#1489
☠ CF Sheriff ☠
I don't know where these so called guides get their torque specs...75 ft-lb is way too low for a lug nut.
I always go to the factory service manual as the definitive guide. From my collection of FSMs, the proper torque spec is:
I always go to the factory service manual as the definitive guide. From my collection of FSMs, the proper torque spec is:
1988 XJ = 95 ft-lb
1989-1992 XJ = 80-110 ft-lb (progressive)
1993 XJ = 95 ft-lb
1994-1996 XJ = 80-110 ft-lb (progressive)
1997-2001 XJ = 85-115 ft-lb (progressive)
1989-1992 XJ = 80-110 ft-lb (progressive)
1993 XJ = 95 ft-lb
1994-1996 XJ = 80-110 ft-lb (progressive)
1997-2001 XJ = 85-115 ft-lb (progressive)
#1490
Senior Member
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
I have a manufacture stamp date of 86 and title/dealer sell date of 1987 ...
So whats an 87? lol
#1491
Senior Member
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
Soon as I get one of these jobs Ive applied for, Im headed back to CR and picking up my ZJ tie rod setup
#1493
☠ CF Sheriff ☠
#1496
CF Veteran
Join Date: Jul 2011
Location: Elkton, Maryland
Posts: 3,235
Likes: 0
Received 2 Likes
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Depending on whos is interested, we can decide on trails then. I'm good for blue-blacks, and maybe Snakebite
#1497
CF Veteran
Join Date: Aug 2011
Location: New Market
Posts: 4,323
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by pulltabmike
I did.... I'm looking to head up there in the next couple of weeks. Wanted to see if anybody else was interested and see if we could come up w/a workable date
Depending on whos is interested, we can decide on trails then. I'm good for blue-blacks, and maybe Snakebite
I'm heading to trails road either this Sunday or next.
#1498
CF Veteran
Join Date: Aug 2011
Location: New Market
Posts: 4,323
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by 96xjclassic
Hey pudgy fingers,
Do you have any pull on cost of tires? My wifes wj needs tires bad.
Do you have any pull on cost of tires? My wifes wj needs tires bad.
#1499
CF Veteran
Join Date: Jul 2011
Location: Elkton, Maryland
Posts: 3,235
Likes: 0
Received 2 Likes
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 4.0
I will check my work schedule later this evening, and throw out a couple of dates...
#1500
Senior Member
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
id go with anyone willing to have a ride along partner...
apparently i broke a few things this past weekend...
I didnt think i was that rough, but it happens.. nothing serious, just dont have the money just yet to fix it AND go play again...
Just got my vehicle down from the lift and...
this past weekend I beat up on my Jeep and now have to/need:
I have to replace my Tie Rod & Track Bar and Drag Link Cause I bent them pretty good
Need Alignment because of the the tie rod & track bar
Need to Re-Balance Front 2 wheels (lost some weights)
Need Passanger side Motor Mounts (going to do driver side at same time since Im going to already be in there)
All this made for a very slow ride home...
i could only go 35mph, took me almost 2.5hrs coming by way of 26 from hagerstown...
but I was able to do every obstacle I came across so im pretty happy overall
im going to take care of the balance and alignment on thursday
just have to adjust the alignment for the bent parts
then i will order the parts and do the rest when they come in
and then of course re-align it
apparently i broke a few things this past weekend...
I didnt think i was that rough, but it happens.. nothing serious, just dont have the money just yet to fix it AND go play again...
Just got my vehicle down from the lift and...
this past weekend I beat up on my Jeep and now have to/need:
I have to replace my Tie Rod & Track Bar and Drag Link Cause I bent them pretty good
Need Alignment because of the the tie rod & track bar
Need to Re-Balance Front 2 wheels (lost some weights)
Need Passanger side Motor Mounts (going to do driver side at same time since Im going to already be in there)
All this made for a very slow ride home...
i could only go 35mph, took me almost 2.5hrs coming by way of 26 from hagerstown...
but I was able to do every obstacle I came across so im pretty happy overall
im going to take care of the balance and alignment on thursday
just have to adjust the alignment for the bent parts
then i will order the parts and do the rest when they come in
and then of course re-align it