1999 Cherokee Part out Custom Bumpers, etc..
So the Jeep got t-boned and rolled it. Insurance company totaled it so I am just going to part ways with it at this point. Honestly if someone threw a new a set of leaf packs in and new rear axle you have yourself a nice trail rig.
Located in Franklin,ma Whole Jeep the way it sits - $1000 Parts only Engine + Trans with about 150K miles (I don't know the exact miles off the top of my head) - $300 Runs great, lots of new parts, always maintained. I'll leave it in and let you hear it run before I pull it. Custom Front Winch Bumper - $250 Custom Rear Bumper with Custom Tire Carrier - $200 XRC8 Winch w/ FairLead and Cover - $150 Dana 30 High Pinion - $50 Fluid just changed too! D30 Rough Country Diff Cover - $20 2 rugged ridge 15x10 wheels with 33" trx m/t tires with good tread - $150 Rough Country 4.5" Front Springs - $40 The interior is in good shape too so anything in there is up for grabs just ask! Thanks! Text message would be the fastest way to get ahold of me 508 353 2410 https://fbcdn-sphotos-c-a.akamaihd.n...17761416_n.jpg https://fbcdn-sphotos-e-a.akamaihd.n...64353602_n.jpg |
Have pictures of your winch? I want to see its condition, may want it
|
Text message sent about the springs and D30.
Might be interested in a few other parts for my Comanche. Thanks -Greg |
Originally Posted by wiggles
(Post 2543465)
Have pictures of your winch? I want to see its condition, may want it
Originally Posted by PseudoSport
(Post 2545701)
Text message sent about the springs and D30.
Might be interested in a few other parts for my Comanche. Thanks -Greg |
Update to the thread guys... I also added a few things that I forgot I had on there. Thanks
Engine + Trans with about 150K miles (I don't know the exact miles off the top of my head) - $300 Runs great, lots of new parts, always maintained. I'll leave it in and let you hear it run before I pull it. Custom Front Winch Bumper - $250 Steering box brace - $20 High Lift Jack - $40 Custom Rear Bumper with Custom Tire Carrier - SOLD XRC8 Winch w/ FairLead and Cover - SOLD Dana 30 High Pinion - SOLD D30 Rough Country Diff Cover - SOLD 2 rugged ridge 15x10 wheels with 33" trx m/t tires with good tread - SOLD Rough Country 4.5" Front Springs - SOLD Rough Country Lower Control Arms - SOLD Front Drive shaft - SOLD A/C compressor/radiator/condenser - SOLD Few people interested in the interior components but I still have everything at this point. Please feel free to text me 5083532410 |
Bump!
|
Another Update....
Engine + Trans with about 150K miles (I don't know the exact miles off the top of my head) - $300 Runs great, lots of new parts, always maintained. I'll leave it in and let you hear it run before I pull it. Few people interested in the interior components but I still have everything at this point. Steering box brace - $20 High Lift Jack - $40 Custom Front Winch Bumper - SOLD Custom Rear Bumper with Custom Tire Carrier - SOLD XRC8 Winch w/ FairLead and Cover - SOLD Dana 30 High Pinion - SOLD D30 Rough Country Diff Cover - SOLD 2 rugged ridge 15x10 wheels with 33" trx m/t tires with good tread - SOLD Rough Country 4.5" Front Springs - SOLD Rough Country Lower Control Arms - SOLD Front Drive shaft - SOLD A/C compressor/radiator/condenser - SOLD Please feel free to text me 5083532410 |
Steering box brace - $20
Which one? |
Honestly not sure of the brand for sure but it I feel like 80% of them are the same exact design...looks like this
http://www.quadratec.com/products/22518_700.htm Two holes are there on the frame side and you have to drill one hole....then the other end just wraps around the bottom of the steering box |
PM me a quote with shipping to 21740.....I want it. I just wanted to know if it was the frame plate or the brace...it is exactly what I want. I have the frame plate.
Thanks |
Originally Posted by mtadd162
(Post 2566660)
Honestly not sure of the brand for sure but it I feel like 80% of them are the same exact design...looks like this
http://www.quadratec.com/products/22518_700.htm Two holes are there on the frame side and you have to drill one hole....then the other end just wraps around the bottom of the steering box Payment Sent. |
I'll be shipping out the brace today...I'll text you when its all set. Thanks!
|
Sold Sold SOld....everything is gone. Thanks!
|
All times are GMT -5. The time now is 03:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands