Drew, aka Drewstang
Louisville KY, PRP area
I have nothing for sale for XJ's.

My XJ is a 96 4x4 4 door AW4. Nothing special, just a winter beater for now but maybe one day I'll get a lift and a roof rack. Its got lots of shiney red LED's for the fire dept.

 

Jim in Mt. Washington, KY here.

What parts do you need? I have some misc. parts to be left over from my 2001 XJ resurrection (nearing the end) & some stock parts from my SJ as well.

Getting close to firing up old yeller.

 

Hey Jim, I'm looking for the front sheet metal from a 97+. I'd like to do the panel swap since mine is pretty torn up. I need the upper core support, and aux fan as well.

 

Drew,
I have some bent front sheet metal to spare.

My spare upper core support is bent a little. Possible to be straightened. I'll take another look at it. I considered straightening it and using it on mine but am not going to. I bought a good one already.

The electric fan I have is trashed except the electric motor on it is still good.

I have a few Mustang parts if you have one but I doubt it's anything you'll need. Catalytic H-pipes and rear control arms.

 

Cool. How bad is the sheet metal? I might just hit up Auto Body Panels or Keystone to see how much everything will be. I know I'll need a good hood, fenders, header panel, bumper, grill, headlight buckets, marker lights, etc. I guess I can grab the hood, core support, and fan from PAP.

I've actually got a bunch of Mustang parts I'm selling as well. I looked through all my old injectors to see if any would work on the XJ, but no dice.

 

Here is a few pictures of what the sheet metal looks like. Like I said, they are bent. The pic in my signature is what it looks like right now. I have a few pieces that I bought that I already had or a group of parts I bought that came with pieces I already had. I still need an extra fan shroud for the clutch fan even.

I do have extra front side reflectors.

 

In Bardstown here, unfortunately i don't know how much longer I'll be able to claim owning my XJ.

1991 XJ
4.5 Teraflex (42" of flex)
33" Boggers
Dana Limited Slip rear

Hopefully i did the pix right and you get a shot of the clean and dirty versions of my baby!

 

Vine Grove, ky. 87 cherokee 5.5 lift. Stock 92 and 94. And nothing Jeep related for sale... unless you want to put a 5.0 sbf in your Jeep, then I can hook you up.

 

Name's Doug, live in Benton. currently have a 89 XJ, actually it's my old lady's for now till i get her something else, but that's just around the corner

 

The name is zach, from Stanford, got a 96 Cherokee sport

 

shawn
meade co.
1990 2dr xj

 

Jordan from Parkers Lake Ky. I am a Jeep fan to say the least. About to snag another XJ to play with. Must have multiple when its what you love. I also make custom Xj box's. That is what I am most known for around here on the forum.



Tons of interest so I am not going to list them all. Top's are Jeeps and Atv's. Raising hell with both.


Heres my ole 99 XJ.






Here is my main hobby.








http://www.myspace.com/video/zosopag...clip/107393934

 

Don
Lexington, KY
06 Jeep
Tons of stuff for sale

 

I don't live in Kentucky, but I work there. I work in Louisville and live in Salem, IN.

'96 XJ w/ 6.5" lift and 33's.

 

97 ZJ
Currently in the garage (needs D30 rebuild)
Vine Grove, KY