Anyone near the Northwest Suburbs willing to help with a front coil install? Or have a press I could pay you to use? Heck, I'd be willing to drive a while for some help... I don't have a garage and it's a bit cold to swap my coil springs outside with my crappy bottle jack.
I'd pay for help, I have the new springs, heavy duty compressors installed on them, just need a lift, a crowbar and some warm garage space! |
Hello all I'm looking for some tires for my cousin. He is looking for a set of 33s or 32s. Craigslist has come up empty for me the past few weeks
|
new guy here from Alton. looking for the front headlight support because mine is not in usable condition anymore after it went head to head with a ford truck at about 30.funny thing is the rad never got a hole and i drove it home.drove straight too.
|
Looking for some help.
I wanted to get a cheap 3inch lift and need help installing it. If anyone is interested in making some money on the side it would be greatly appreciated. I'm located in McHenry il. https://cimg9.ibsrv.net/gimg/www.che...bb7cf0d5bc.jpg
|
Originally Posted by Rexall
(Post 3388051)
I wanted to get a cheap 3inch lift and need help installing it. If anyone is interested in making some money on the side it would be greatly appreciated. I'm located in McHenry il. https://cimg9.ibsrv.net/gimg/www.che...bb7cf0d5bc.jpg
|
Long shot, anybody looking to sell a set of 31-33" all terrains?
|
Originally Posted by gyrator930
(Post 3396197)
Long shot, anybody looking to sell a set of 31-33" all terrains?
|
New here !
New to the site, picked up a 1998 Xj about a week ago. So far have replaced parts to get her back on the road. New rear drums,shoes,springs and break lines, plugs, wires, distributer, rotor,coil,new sway bar links as the one on there were rusted off, led headlights, new air box, needed a new head light switch and front washer pump. Plan on putting a 4.5 inch lift in the near future with 32" tires, cut fenders and new fender flares to start. It all get addicting as things progress. https://cimg5.ibsrv.net/gimg/www.che...80b8d20084.jpg
https://cimg7.ibsrv.net/gimg/www.che...fa28b016db.jpgTune up https://cimg8.ibsrv.net/gimg/www.che...51543aebfe.jpgWheel cylinder in https://cimg9.ibsrv.net/gimg/www.che...ce2b75e81d.jpgInterior https://cimg0.ibsrv.net/gimg/www.che...8b4ff326f5.jpg https://cimg3.ibsrv.net/gimg/www.che...938b9d0789.jpgInterior https://cimg7.ibsrv.net/gimg/www.che...c207bed7f3.jpg https://cimg8.ibsrv.net/gimg/www.che...de903230cd.jpg https://cimg0.ibsrv.net/gimg/www.che...29a67e86c3.jpg https://cimg2.ibsrv.net/gimg/www.che...2b6664f388.jpg |
is the blue XJ with hood pins yours ARES?
how hard is it to install those/ditch the stock hold down? |
Originally Posted by RRXJeeper71
(Post 3484269)
is the blue XJ with hood pins yours ARES?
how hard is it to install those/ditch the stock hold down? |
Danville here !
|
Checking in
Danville Illinois here
|
Newbie To forum jep lover who is interested in furthering his Jeep experience.
I hope this is the proper place to pose the question. Will the head from my Jeep XJ year 2000 which houses the thrmostthe interchange with my brothers Jeep Cherokee Sport year 1995? Thanks in advance concerned brother.
|
Originally Posted by Jloveep
(Post 3507097)
I hope this is the proper place to pose the question. Will the head from my Jeep XJ year 2000 which houses the thrmostthe interchange with my brothers Jeep Cherokee Sport year 1995? Thanks in advance concerned brother.
|
All times are GMT -5. The time now is 05:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands