Houston area XJs--- what ya working with
 

Hey guys just looking to see what kind of mods you guys in the Houston or general area have done with your jeeps... And to see what kind of wrenching skills are local

Don't have a picture right now but will post later....
-1999 Black xj
-138k miles
-4.0 ax15 combo
-D30 4.10
-C8.25 4.10
-AA SYE w/Tom woods dshaft... New tcase with 70k miles
-Custom long arm with massive teraflex joints
-Currie tie rod
-Rough country 4.5 full leaf
-2.2 shocks, soon to be bilsteins
-Detours USA rear bumper and tire carrier
-JCR sliders- custom modified and welded to fit long arm crossmember
-Heavy duty Replok gold clutch
- Alloy USA outer axle seals
-Black cragar with 3.75 backspacing
-billet aluminum spacers
- 32x11.5x15 Bfg km2
-IRO double sheer trac bar and bracket
- ZJ Leather seats
- 784 injectors
And more...

Mine is just lifted 6.5" on 33's and wheeled hard.
http://a5.sphotos.ak.fbcdn.net/hphot...90552496_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-...05095404_n.jpg
1997 "Mall Rated" Cherokee
4.0 ax15 combo
6.5" RoughCountry Rear, 4.5" RoughCountry Front Lift.
JCR Rock Sliders
Logans Metal Front Bumper
Warn Rear Bumper/Tire Carrier
Aussie Front Locker
33" BFG Mud Terrains
D30 Front/C8.25 Rear
Changed 3.07 Gears to 3.54 Gears
Alloy USA outer axle seals
TerraFlex HandTrottle
60 inch Extreme HiLift
SmittyBilt X20 8000lb. Winch
Standard electronics, Sterieo, Subwoofer, CB, ect. . .

As far as wrenching skills, I can do anything including fab work except for setting up gears in a diff, and auto trandsmission repair.

Cool.. Look like some good rigs so far! Ill get pictures up next week cause I'm in Houston for the week and my jeep is still in chicago

1999 Jeep Cherokee Sport
-Champion 3-row radiator and flow-cooler water pump upgrade
-hack & tap
-Swapped in 8.8 with 4.10 and Aussie Locker
-Riddler Diff. Covers front & rear
-6.5" RC coils and a 2" spacer with Iron Man Fab adjustable upper and lower CA's
-4.5" RC leaf packs with 3.5" Iron man Fab adjustable rear shackles
-RR double shear track bar set up
-RR 1 ton steering
-Extended sway-bar disconnects (no sway-bar in rear)
-Extended brake lines
-2x4 rocker guards, transfer case skid, front & rear steel bumpers
-Ramsey 9k
-Durango Steering Box upgrade & drop pitman arm
-CB
-Roof Rack with fullsize spare
-Lights on hood & roller fairlead & Air horn
-Wheel wells trimmed up
-Misc soundsystem mods
-Maintenance including new valve cover gasket / valve cover, new oilpan gasket, new rear main seal
-Have a lincoln stick welder if you need it, all i ask in return are welding lessons hahah :tongue_smilie:

Well where to start I'm pretty much stock...But

1997 Jeep Cherokee sport
4.0 liter engine
np 242 transfer case
around 220 xxx on the clock
4.5 inch rough country add a leaf lift kit
32" Pro Comp M/T with stock rims for now
A warn 9000 lb winch not yet installed have to get it from my step dad's shop but I still have to make a bumper to fit it
I do know how to mig weld pretty decently but my stick welding is not real good I know the basics I'm only 18 and still in school but I can do most things

1996 Cherokee Classic - 134,XXX Miles - Moss Green Pearl
Up-Country Package
Tow package
5speed d30 up front, LSD d35 in back
All oem skid plates, HD Cooling
MB 15's with 30" BFG A/T's <<<- Previous owner :(
4.5" Rough Country coils
2" rough country shackles in back with jimmy bastards
Zone HD Steering stabilizer
Zone Nitro shocks all around
V8 ZJ Tie Rod Setup
IronRockOffroad Adjustable Double Shear Trackbar
IronRockOffroad Adjustable LCA's with bend
Home made short ram intake with K&N cone
Autopal H4 E's with 4300k hids
$10 harbor freight yellow fogs
JDM Integra Type-R shift knob
Aftermarket headunit, kicker speakers up front, kicker 6-1/2's in SoundBar
Custom "Joaane's Fabrics" Military Camo headliner :)
5% Tint All around with ATR film
Jeep Military Shovel mounted above rear cubby
Couple of super freaking awesome jaw dropping stickers