Is there an off road place on Kuykendahl? Never heard of one there.

That sucks because TX4WD has a huge state wide get together in Bryan in sept.

 

Where and when pm me your numbers I'm constantly upgrading and repairing my rig and I'm bored with the spot i wheel

 

What date in September?

 

Was down there on the weekend grilling.

 

I'm not sure on dates yet for a small run as I'll tie out with some guys on XJTalk and see what they have. I'm think creekside for my first run to test out my shackle relocation brackets I made. I'll let everyone know.

Can you PM me the GPS or addy to where you wheel on Kuyk? I am curious if I can do an even smaller test there.

28/29. It's and all nighter. Basically the Houston guys meet as the truckstop on 290/2920 and roll out. The thing is they don't like straglers as that park is closed unless it is a group even, ie not just 3 or 5 rigs wanting to wheel. It is cheap and we will be camping overnight.

I am busting my hump trying to get all the little things done to her before the trip. Thank goodness for my welder!!!

 

8326229920 everyone just shoot me a text with names and which Xj you drive

 

I'm interested in going out on a Friday run. I'm also pretty stock right now and need some help prepping and putting on a used 3" lift. Anyone game on either?

 

I could help with the lift but cannot do it this weekend as I am already booked solid.

For runs I am still putting together my shackle relocation brackets so no wheeling till those are done just driving her around. Very bouncy in the rear and that has to go!!

 

I'll need to meet up with you or someone before I do the install. I'm sure the kit probably needs some new bushings, etc. So identifying that and getting some experienced input would be good for me. I'll try to keep up on this thread to make it to a group wrenching meet up.

 

I'll wheel Friday

 

I am off of the skinner/290 area, but the Jeep is back home in South Dakota. I do however have a black ranger that you will likely see from time to time getting towed behind a black F150. Hopefully I can get it out wheeling here working on getting some tranny issues fixed as of now the valve body is sitting in the cab



Front is sitting low in the pic from the straps, but rear is at proper ride height.

 

Got a text from me. Looking for some beginner stock level runs and experience for the old Jeep, Redwood. I'm off every other Friday, so I have some time then to get started.

 

what components you have to install on with your lift (front coils, rear springs, new arms or drop brackets?, extended shackle, new shocks, track bar?)

 

little late on this (wrenchin on the jeep this past week), but I live near Troglodyte around 529/Barker Cypress May be goin out with the my Dad to creekside on Monday, not sure yet

 

Just learning Jeeps, so you have me there. Not even sure what brand the set is. RC's maybe?

EDIT: After doing some looking it looks more like a Rubicon than anything else. Not sure which yet. I'll see what I can get off them.