I can help too.

 

Anyone have a bearing press if I wanted to go with an HD SYE? I'm not sure if I have those needle bearings or not at this point, but I'm trying to figure out if I can get the job done and go HD, or just call it a day and do an H&T...

HD looks easy enough except for pulling those needle bearings...

 

Future in laws? And already trying to get you to sell your rig? That sounds bad, very bad!

 

If I get new swaybar bushings will my swaybar stay in place or fall down. Because right now it falls down underneath the coils and is a **** to get out. Ended up bungee cording it. So yeah will new bushings work?

 

New bushings or not you should come up with a way to keep it held up and out of the way.

 

You dont need sway bars! Front or rear. I dont run eather on my heep and I DD mine. Has a little body roll but nothing to bad. I have the right shocks and coils now that it helps alot and dosent bother me

 

Same!

 

You'll need to hold it up with something no matter what. When I had mine I just used a bungee.

 

My bushings are 1mm undersize and the sway bar hasn't fallen at all since it was moved up (like 6 months ago)

 

Why haven't you just completly removed it if your never gonna hook it up?

 

Front skid makes it a pain and I never have.

 

Yea front skid is why I left mine but made disconnects for it yesterday.

Main purpos of the skid on mine is to catch the leak I have in the front of the jeep.

 

I'm not going to remove my sway bar...I just got JKS quick discos that would defeat the purpose me spending 150 bucks on em o.o it would just get stuck under the coils when off roading so I just bungee it up.

 

All sorts of goodness going on with the jeep! NOT!!!

Found out the pass tube on my front 44 is bent! YAY!! So the front getting pulled out and set off to crawlertech to have them straighten it!

And Found out I tweaked the frame and bent it a little on chinamans, wasent just the trac-bar bracket. Because T&T customs sent me a new one and its still bent and drives like crap, plus I saw the frame bent when I pulled it off lol. SO on the 23rd she goes to Dustins to get a new mount welded on, plus plate the whole front frame and make it a little more beef! Hope not to bend everything else.

Worse part, is my birthdays on the 26's, and I was going to buy some sweet new toys for the jeep, guess not! Have to spend my money on replacing ****! Happy birthday present to me!!! lol

Anyone interested in a brand new T&T customs trac bar bracket

 

Damn dude ^^^