ISO Rear axle
#1
Seasoned Member
Thread Starter
Join Date: Jul 2009
Location: Edwards AFB CA
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L H.O.
ISO Rear axle
Does anybody have or know where I can get a rear dana 44 from an 86-91 Grand Wagoneer? Or axle shafts from the non vacuum disco from the front dana 44? I've been through all the pick-a-parts near me and have had zero luck locating one. Also, I need the 6 lug since I already have a HP44 with that bolt pattern, before anybody asks.
The rear axle has a centered pumpkin, six lugs, drum brakes, and a 59" wms to wms width.
I've send a few emails out to the "Jeep only" yards around me and I am waiting to hear back. Just figured I'd drop a line here and see if anybody could help me out.
Thanks guys, any help would be appreciated.
The rear axle has a centered pumpkin, six lugs, drum brakes, and a 59" wms to wms width.
I've send a few emails out to the "Jeep only" yards around me and I am waiting to hear back. Just figured I'd drop a line here and see if anybody could help me out.
Thanks guys, any help would be appreciated.
Last edited by jeep.kevin; 12-30-2013 at 11:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Docruiz
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-02-2015 07:54 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)