you guys with sye / CV Driveshafts
06-03-2009, 08:12 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2009
Location: St Paul, MN
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.6L stroker
you guys with sye / CV Driveshafts
I am wondering if the combo I bought from rusty's is going to come with shims? or if I will even need them? I have about 4inchs of lift.
any idea?
any idea?
06-03-2009, 08:44 PM
#2
Senior Member
Join Date: Jun 2009
Location: Blakeslee, PA
Posts: 750
Likes: 0
Received 3 Likes
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.7
No idea if shims are included.
Will you need them? That's hard to answer. Every Jeep is different. Your best bet is to isntall the SYE & Shaft along with the lift and measure.
Then you will know exactly what shim you need ... rather than going off someone else's SWAG.
Joe
EndlessMtnFab
Will you need them? That's hard to answer. Every Jeep is different. Your best bet is to isntall the SYE & Shaft along with the lift and measure.
Then you will know exactly what shim you need ... rather than going off someone else's SWAG.
Joe
EndlessMtnFab
06-03-2009, 09:33 PM
#3
CF Veteran
Join Date: Nov 2008
Location: Paso Robles Ca
Posts: 2,473
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
it most likely wont have shims
and yes you will need them if you want proper drive shaft alignment
install every thing then you can see what shims you will need
Thread
Thread Starter
Forum
Replies
Last Post
lil01cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-10-2015 05:56 PM
Jethro4days
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
09-05-2015 08:29 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)