xj front end repair cost question
Thread Starter
Seasoned Member
Joined: Dec 2008
Posts: 352
Likes: 0
Year: 1993
Model: Cherokee
Engine: 4.0L
hey i was wondering if anybody has had there drivers side fender pushed in about 6inches and that it broke the intake. I just want to get an estimation on the cost. I took the whole front end off and put a new intake on but its just laying on the intake manifold right now. I also tried to put it out with another jeep but no luck. Ill post pics when i get them off my camera
Member
Joined: Oct 2008
Posts: 197
Likes: 0
From: Stillwater, NJ
Year: 1994
Model: Cherokee
Engine: 4.0 L AMC 242 High Output
Eeeek. That'd be tough, it bent the frame in. I couldn't give you numbers for that, but I'm assuming it'd be pricy. The intake itself isn't expensive, but that looks like some serious body work.
Trending Topics
Senior Member
Joined: Dec 2008
Posts: 606
Likes: 0
From: northwest Indiana USA
Year: 1990 laredo
Model: Cherokee
my advice would be to start asking around as to who pulls frames/unibodies and find someone with the equipment.
I have a friend who has a frame stretch rack and does body paint work cheap if anyone locally needs help in that area pm me. They do great work for a good price which is hard to find with body work.
I have a friend who has a frame stretch rack and does body paint work cheap if anyone locally needs help in that area pm me. They do great work for a good price which is hard to find with body work.
Seasoned Member
Joined: Aug 2008
Posts: 425
Likes: 0
From: Illinois
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Is the frame bent?
Member
Joined: Oct 2008
Posts: 197
Likes: 0
From: Stillwater, NJ
Year: 1994
Model: Cherokee
Engine: 4.0 L AMC 242 High Output
Is the car driveable? (Aside from the intake issue)
Seasoned Member
Joined: Aug 2008
Posts: 425
Likes: 0
From: Illinois
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Member
Joined: Oct 2008
Posts: 197
Likes: 0
From: Stillwater, NJ
Year: 1994
Model: Cherokee
Engine: 4.0 L AMC 242 High Output
Well, let's hope for that. Body work isn't too bad, usually you can find a distant relative who does it. lol. But for the frame to be bent is a real headache






