Window cranks don't work
I just bought a 1987 Cherokee (4-door) and the front window cranks just spin, the windows are stuck in the down position. I managed to get both inside door panels off but now I'm stuck. The handle was not stripped, it actually turns spline it attaches to but that's as far as it goes, nothing else budges in there. I have no clue how to proceed and I'm that hoping someone might be able to help me troubleshoot this problem and tell me how to fix it.
Thanks in advance. edited to add: the vehicle had been sitting for 2-3 years. |
You need new window regulators.
Your only hope is to lift the window up while cranking the handle and see if it will start working. If it does, don't roll the window down that far again. |
Originally Posted by cruiser54
(Post 3508239)
You need new window regulators.
Your only hope is to lift the window up while cranking the handle and see if it will start working. If it does, don't roll the window down that far again. So a manual roll up window has a regulator, and if they do, is that a job the average person can do? |
Gotta be able to drill out big rivets.
|
Originally Posted by cruiser54
(Post 3508239)
You need new window regulators.
Your only hope is to lift the window up while cranking the handle and see if it will start working. If it does, don't roll the window down that far again. |
All times are GMT -5. The time now is 08:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands