Will These Wheels Fit? BS issue
 

As usual I tried to search as much as I could on this board and in google, but cant really grasp a straight answer to my question.

I have a 4.5" Rough Country lift. Im going to be running 32x11.50 tires.

Will a 15x10 wheel with 3.62" back spacing fit ok? Rubbing issue etc?

I see a lot of guys on the boards that run crager soft wheels do the 15x10 with 4.00" bs.

If the 15x10 wont work, I will be going with 15x8 with 3.75" bs. I just really like the look of a deep lip.

Thanks in advance guys.


Please post pics if you have any with the same application:shifty:

you want at least 3.75" BS for a 10" 4" BS is better, but I know guys that use 3.75". 3.62" might rub a little. You could always get those and then also get a set of LCA's from a ZJ/WJ. They require a little grinding to fit, but they'll keep you from rubbing.

Thanks for the info.

Will the 15x8" 3.75"bs be ok?

Yea I wouldnt use a 15x10, that is WAY too fat

I have 33s on a 15x8

I guess I will be going with the 15x8. Hope the bs on them is good enough

15x8 with 3.75" BS will work perfectly.

Some pics of my 15x8 3.75 backspacing. I run 31" x 10.50" tires.

http://i215.photobucket.com/albums/c...erokee/sig.jpg

http://i215.photobucket.com/albums/c...e/124_0406.jpg

http://i215.photobucket.com/albums/c.../375bsrear.jpg

http://i215.photobucket.com/albums/c...375bsfront.jpg

I run 15x10's and have never had a rub! Never hit my lower arms and I did a little trimming and its good to go. I like the slim wider wheel base is always better. But most important I run 12.50 with tires and it makes them look like a flatter sidewall. Just not a fan of a tire looking like a balloon. And when you get in the 33" and over with 8" wide rims they tend to look like that.

I have seen alot of people loose their bead because they were running 12.50s on 10" rims

That is all I needed to know :thumbsup: I just wanted a deep lip.

Calvinator...thanks for the pics

With my 4.5" lift everyone told me to get the 15X8s and i got a big head and went with the 15X10s with the 3.75 in bs with 32/11.50/15s. it rubs on the inside fender flare and could be fixed with a simple trim of like .5" i like how it looks tho.