whats the best way to trim fenders?
#1
Senior Member
Thread Starter
Join Date: Feb 2010
Location: errrvre where
Posts: 681
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
whats the best way to trim fenders?
i have a 96xj with a 6.5" lift and 35"bfgs. they rub at full turn on the back of the fenders. whats the cleanest method of trimming them?
#4
Registered Users
Join Date: Aug 2009
Location: Ny
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0ho
x2 on the angle grinder, however, follow the radius, dont just cut straight up and across it looks terrible every single time someone does a fender like this /------\
round corners not square and you'll be happier.
done with an angle grinder, one pass. how you do the very front is all preference. I ended up not using these fenders because I went to a 97+ front end, so they are sitting as spares.
round corners not square and you'll be happier.
done with an angle grinder, one pass. how you do the very front is all preference. I ended up not using these fenders because I went to a 97+ front end, so they are sitting as spares.
#5
Senior Member
Thread Starter
Join Date: Feb 2010
Location: errrvre where
Posts: 681
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
i deffinatly like the rounded look rather then the diagnal or square look. so id just follow the contour of the pannel?
#6
Senior Member
Join Date: Jun 2011
Location: New Mexico
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
I just did this.. Mark how much I wanted to cut. Then straight lined all my cuts .. on those top corners I did a straight cut to. Once done with the major cuts I just used a flapper disk to round out my corners. Rear fenders are really where all the fun is at
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Feb 2010
Location: errrvre where
Posts: 681
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
Originally Posted by freegdr
very slowly...lol...
Thread
Thread Starter
Forum
Replies
Last Post
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-29-2015 08:43 PM
Sivadon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-24-2015 07:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)