What years will fit my '90
I recently had an accident and bashed in perty much everything on the front left my question is what year xj's can i snatch the parts off of ?
|
you can get anything from 96 and down to match your 90 body line, or do a full clip swap and get a 97+ grill, fenders, header panel.
|
Originally Posted by 96_xj
(Post 562644)
you can get anything from 96 and down to match your 90 body line, or do a full clip swap and get a 97+ grill, fenders, header panel.
|
just a matter of take the old off, bolt the new on. You might have to drill a new hole or two here and there. But its not hard at all. Many on here have done the front clip swap
|
Will the radiator and ac condensor swap over from a '97+ ?
|
Originally Posted by CarolinaBoy
(Post 563470)
Will the radiator and ac condensor swap over from a '97+ ?
I would go on quadratec and look up the parts that you want and it will tell you what years it will fit. if it works for all years then its perfect! |
Originally Posted by 96_xj
(Post 563474)
I am not sure since you have a renix engine and the 97+ is a H.O.
I would go on quadratec and look up the parts that you want and it will tell you what years it will fit. if it works for all years then its perfect! |
Originally Posted by CarolinaBoy
(Post 563470)
Will the radiator and ac condensor swap over from a '97+ ?
|
unfortunatly you are SOL in the 91+ radiators fitting your 90
here is the replacement to yours: http://www.quadratec.com/products/51210_12.htm I would look into a local shop about getting an all metal replacement with 2 rows. You wont be disappointed |
Originally Posted by N20jeep
(Post 563483)
im pretty sure it will, you may have to do some cutting though on one end because your 90' does not have a filler neck, but the 97 does on the radiator.
|
Originally Posted by CarolinaBoy
(Post 563487)
And what about the ac condensor ?
|
Originally Posted by 96_xj
(Post 563486)
unfortunatly you are SOL in the 91+ radiators fitting your 90
here is the replacement to yours: http://www.quadratec.com/products/51210_12.htm I would look into a local shop about getting an all metal replacement with 2 rows. You wont be disappointed |
All times are GMT -5. The time now is 05:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands