What kind of electric switches are these. They are OEM.
1 Attachment(s)
Looking at replacing these switches for lights, locker, etc. What kind of switches are they, meaning model number, name, etc? I added the panel after I found it at a local bone yard.
|
OEM.
|
Rear defroster, windshield washer, fog lights.
|
Originally Posted by BotakBeng
(Post 1885164)
OEM.
|
Originally Posted by BigBear
(Post 1885167)
Rear defroster, windshield washer, fog lights.
|
2 Attachment(s)
Bad photo shop, but you get the idea.
Before and after. By replacing the switches. |
.....from a wrecked XJ in a JY.....paint 'em black.
|
Originally Posted by djb383
(Post 1885217)
.....from a wrecked XJ in a JY.....paint 'em black.
Ya, I thought about that. But, my OCD will not allow it. :grin: |
So you are not using those for what they are then. I gotcha why not just touch it up with a black sharpy or paint marker?
|
Originally Posted by BigBear
(Post 1885222)
So you are not using those for what they are then. I gotcha why not just touch it up with a black sharpy or paint marker?
OCD wont allow it. lol! :grin: The older years look like they maybe blank. But, i'd buy new if I have a part number or something. |
Okay what about like rubbing it off with an eraser?
|
Use some very fine sand paper.
|
or non acetone nail polish. it'll eat the paint that makes up the markings, but not the plastic of the switch. Dont soak em in it, lol that may eat some plastic.
|
Originally Posted by BigBear
(Post 1885232)
Okay what about like rubbing it off with an eraser?
Originally Posted by stock95sport(for now)
(Post 1885243)
or non acetone nail polish. it'll eat the paint that makes up the markings, but not the plastic of the switch. Dont soak em in it, lol that may eat some plastic.
|
Brake fluid also removes paint from plastic without ruining it. Probably a better idea than non acetone nail polish remover. I say take some old brake fluid, dab a Q-tip in it, and rub the paint off, if your OCD allows. Haha. Just don't let it sit on there for too long or let it hit anything else. Hopefully it would come out fine. If not, paint them to match the rest of the interior, just use the right paint and do a decent job. I doubt you would find some without the little markings on them. Good luck!
|
A couple of the switches you have will be a pain to get to work correctly. Such as the first one that is for the rear window defroster. That one has a timer that if I am not mistaken only stays on for about 4 or 5 mins. I has a timer in the switch. The second one is for the rear window wiper and sprayer. Which is a two position switch. The first position is wipers on the second position is spray and temp. on. The last one you have pictured will be the easiest to hook up since it's for the factory fog lights. If you don't mind spending a few bucks you can get some switches that look OEM. Here is the link for them. Hope this help you out.
http://www.ebay.com/itm/300469430348...84.m1423.l2649 |
Originally Posted by RTorrez1
(Post 1885825)
A couple of the switches you have will be a pain to get to work correctly. Such as the first one that is for the rear window defroster. That one has a timer that if I am not mistaken only stays on for about 4 or 5 mins. I has a timer in the switch. The second one is for the rear window wiper and sprayer. Which is a two position switch. The first position is wipers on the second position is spray and temp. on. The last one you have pictured will be the easiest to hook up since it's for the factory fog lights. If you don't mind spending a few bucks you can get some switches that look OEM. Here is the link for them. Hope this help you out.
http://www.ebay.com/itm/300469430348...84.m1423.l2649 |
I have to wait till I get paid then I'm ordering myself a couple.
Glad I was able to help. |
Originally Posted by RTorrez1
(Post 1885845)
I have to wait till I get paid then I'm ordering myself a couple.
Glad I was able to help. Again, thanks. You nailed it! |
Originally Posted by CrawlerYJ
(Post 1885162)
Looking at replacing these switches for lights, locker, etc. What kind of switches are they, meaning model number, name, etc? I added the panel after I found it at a local bone yard.
Originally Posted by CrawlerYJ
(Post 1885169)
I figured as much. Looking for like a model number of some sort so I can maybe get some blank ones w/out marking.
Rocker Swtiches! |
Originally Posted by BotakBeng
(Post 1886101)
|
Originally Posted by BotakBeng
(Post 1886101)
|
Originally Posted by RTorrez1
(Post 1886862)
Now those are some great looking switches. And they are even cheaper even though you have to buy the rocker and the switch body separately. The thing I want to know is will they fit in to the stock slots?
|
Looking forward to some installed pics. :popcorn:
|
Zombie Lights? Some people really don't have lives.
|
Originally Posted by RTorrez1
(Post 1886862)
Now those are some great looking switches. And they are even cheaper even though you have to buy the rocker and the switch body separately. The thing I want to know is will they fit in to the stock slots?
|
Originally Posted by lowrange2
(Post 1887203)
Zombie Lights? Some people really don't have lives.
|
Originally Posted by Red82
(Post 1887450)
You sir are just unprepared. :grin:
|
Originally Posted by CrawlerYJ
(Post 1887403)
They will NOT fit. They are 1"x2" switches. Bummed!!!!!!!!!
|
Originally Posted by CrawlerYJ
(Post 1887456)
Agree! He has 2,743 posts and we don't have lives? Ummmm...ok. :D
Dont really understand why you are wanting to replace those switches. Why not just get a new panel WITHOUT those switches and cut holes for aftermarket switches.. |
Originally Posted by RTorrez1
(Post 1887673)
That sucks! They would look pretty good in the stock area.
|
Originally Posted by xj_maniac_newb
(Post 1887688)
I have a life. Some of us have just been here a while :p
Dont really understand why you are wanting to replace those switches. Why not just get a new panel WITHOUT those switches and cut holes for aftermarket switches.. I already bought the panel as posted. 2"x1" is actually big. I just discovered. No biggy. Ill probably just do them where the ash tray is. |
3 posts a day isnt alot there john, but like you said, who's counting? :huh:
|
Originally Posted by xj_maniac_newb
(Post 1888000)
3 posts a day isnt alot there john, but like you said, who's counting? :huh:
Back on topic. |
Originally Posted by CrawlerYJ
(Post 1887746)
Ya, I am bummed. I might do them where the ash tray is.
|
All times are GMT -5. The time now is 10:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands