ckysodkorn_xj

i have a 2 in lift now. what would i need if i bought 3 in lift coils with an aal. ill replace my current aal with a 2in shackle giving me 5 in the back and i want to use the 3 in lift coils with my current spacer. what all else will i need?

x91j

shocks, tc drop,sye, trackbar relocaton, extended brake lines, probably some longer arms

mike albo

shocks, trac bar, maybe lower arms,brake lines.

ckysodkorn_xj

isnt a t case drop the subsitution for a sye? and how much is all this going to cost me? i know a t case drop is only 40 bucks

x91j

why dont u just make a tc drop? u can use washers or a one inch piece of metal

greenbergsxj

i have this set up...you'll need a tc drop (you could easily make), track bar relocation bracket, shocks, adj lower control arms (or its gonna drive like ****), brake lines relocated, and i think that's about it

ckysodkorn_xj

im thinking maby i should just get the 4.5 in lift kit. haha

greenbergsxj

yeah, might not be a bad idea...i would spend a day and look around online everywhere, you may find all the parts above for a little less than a whole new kit. mine total was around 900 for parts (2 inch shackle spacer/3 inch springs)

csmart30

Yes sir

X2 on the looking around

And you would definitely need some new brake lines, shocks, Tbar relocation/new adjustable one, and as stated tcase drop or sye.

ALIGNMENT

ckysodkorn_xj

think imma go with the 4.5 kit.. found one for a little over 400 bucks and it comes with everything including shocks.. was wondering sence it comes with all that stuff named above could i pop my spacers back in with that and be ok?

greenbergsxj

the kit comes with adj lower control arms, and adj trackbar?

clayton3854

the Rc 4.5" AAL does come with adj control arms, but does not include adj track bar RC makes one for 100 i beleive just get that also, you shouldnt need a sye either (may want one but not needed) im running this kit without SYE but i have upgraded most of my steering.