What can I do to get some hp in my v6 86
I'm lookin for some junkyard hp . What kinda stuff can I go junking for to get some more hp out of my carburated 2.8l v6? The exhaust is brand new basically and is 2.5 all the way through. I don't wanna change that so what else can I junk for?
|
2.8L?
Not a lot, honestly. They are crap motors. Supposedly you can put a much better 3400 V6 in it, but I'm not sure as to the details. |
Originally Posted by CodeXJ
(Post 615649)
2.8L?
Not a lot, honestly. They are crap motors. Supposedly you can put a much better 3400 V6 in it, but I'm not sure as to the details. I can get a 3.4 for 500 with the wire harness and everything and I have looked into it. I wanna stick with a carb and Without the fuel injection, that 3.4 isn't worth it |
350 4 bolt chevy w/supercharger
|
You can get a high performance cam from Comp Cams, and roller rockers from them too. Silvolite makes higher compression pistons for the 2.8, and I think if you look hard enough, you may find an intake manifold too. With all of that stuff, you might get an extra 40 horsepower. So that gives you a total of 62 horespower after it is all said and done. A small block Chevy would be the most cost effective way.
|
what part of "junkyard hp" are you people missing? I wanted to know if there are like oem parts from other cars i can out on mine. Kinda like bastard packs and f250 springs for a cheap lift. cept i want hp not height lol
|
we are getting it,that motor isn't worth the time to hop up
|
Originally Posted by mike albo
(Post 615741)
we are getting it,that motor isn't worth the time to hop up
|
Why would one want carb of FI?
|
Originally Posted by nathan_carmona
(Post 615748)
it keeps up with my buddys 4.0l The only problem is it stalls on the trails sometimes cause of the carb (hellllo heal-toe lol)
Seriously, the 2.8 isn't worth its weight as boat anchor. You can throw all sorts of mods at it and all your gonna do is make a little more power and severely effect it's reliability. You'd be better off setting aside some cash to put a proper engine in. |
Originally Posted by Weou09
(Post 615749)
Why would one want carb of FI?
Not to be a smart @** about it but it's just cheaper and easier. :grin: |
Originally Posted by CodeXJ
(Post 615774)
What's wrong with your buddy's 4.0? :grin:
Seriously, the 2.8 isn't worth its weight as boat anchor. You can throw all sorts of mods at it and all your gonna do is make a little more power and severely effect it's reliability. You'd be better off setting aside some cash to put a proper engine in. |
The best way to get more hp with a 2.8 would be to strap it to a rocket.
If it hangs with the 4.0 and runs good don't worry about it. |
Originally Posted by Andrew0257
(Post 615781)
The best way to get more hp with a 2.8 would be to strap it to a rocket.
If it hangs with the 4.0 and runs good don't worry about it. |
Drive it like your mad at it.
|
All times are GMT -5. The time now is 08:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands