wanna go bigger
#1
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Ga
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 inline 6
wanna go bigger
im kinda getting into this whole make ur jeep huge thing.i did a 3inch lift on mine with 3 inch lift coils from rustys and s10 leaves in the rear plus "new" pro comp shocks.that is all,i didnt need to relocate front brake lines cuz they had tones of slack but now i want to go 4 or 5inches.what do i need. .maybe shakles in the rear and spacers up front and tc drop, lower control arms.Is that it ,im looking to make it steady on road too.right now im just pricing it out so know how much i need to save.
thanks,
Drew
thanks,
Drew
#3
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Ga
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 inline 6
didnt no what caster was so i looked it up if im right is that like the ball joint or something it seems complicated if someone could help explaine it im 15.
#6
Seasoned Member
Join Date: Dec 2008
Posts: 495
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L High Output
I have pondered over doing the same thing with my XJ. Gonna aim for about 5.5" whenever I do it. I have found that you will need lower control arms, possibly upper control arms to correct you caster angle. Extended brake lines to make sure there's plenty of slack there, and if it rides too rough for you at that height getting some control arm drop brackets will help. a T-case drop will probably get you by for awhile, but a SYE/driveshaft will be needed down the road. You'll also need an adj. trackbar as well. Going above 3" of lift requires quite a few modifications to make it reliable and comfortable, but once it's all done it makes for a pretty sick XJ!
Trending Topics
#10
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Ga
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 inline 6
quess i just need to get money a lot of it.i dont want a pos jeep with auto zone crap on it.guess ill just have to get a lot of money, sell my lift and go 6inch rough country with 36"s hows that sound jk but seroiusly im just gunna do it right the SECOND time.
#11
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Ga
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 inline 6
maybe this info will help im just trying to fit 33s . can i stay where i am and just trim? or should i spacer like 1inch in the front.making it around 4 up front and maybe 3.5 to 4in the rear.