Unsure of parts to use
#1
Newbie
Thread Starter
Join Date: Nov 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Unsure of parts to use
Purchased a Chrysler Export Right Hand Drive 1995 Jeep Cherokee. Need a transfer case but not sure if I can get one out of an old US Jeep. It's a 4.0 Litre High Output 4x4, engine label has the following: 5303 125 Catalyst, SCR24218G1EA, SCR105Baymon, SCR105Baypon, thanks
#2
Senior Member
Join Date: Nov 2014
Location: Hacienda Heights
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
You can have yours rebuilt or replace it with the same model transfer case that came out of it so you know everything will bolt right in. There should be a round red & silver tag on the back of the case with the number. Most common is NP231. If your shift lever has a full time 4wd option it's a NP242, without the full time option it's a NP231. As far as I know those were the only two options, but do check it.
Thread
Thread Starter
Forum
Replies
Last Post
nickfancher1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-10-2017 05:56 PM
Goon1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
03-15-2017 11:36 AM
Pines
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
01-20-2014 12:00 PM
bubbacummins
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
01-20-2012 08:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)