Hey guys I have a 95 cherokee 4.0 auto 4x4.. 4.5"/5" rustys lift. 33x12.50 tires.

Upon slowing down and harder on the breaks I get a periodic "clunk" or "knock". Almost like every time a drive shaft turns to a certain point it makes the noise, and I can feel it.

So I'm thinking u joints..

Seems there is a bunch of different ones so I need help identifying which part numbers I need. I want the best of the best so I don't have to worry anymore.

I'd like to get them locally so I don't have to pay shipping and I get a killer discount from worldpac..

Here we go, sorry if the pics suck. Each pic is a different joint.








Thanks in advance!

Pics of the XJ!

 

rear driveshaft uni's are the same, as is the front drive shaft. The front axle outer ones are different IIRC... 1330 comes to mind here...will have a look at the part numbers (although yours is a pre-update, the shafts have been pretty much the same)

Rockauto.com has Moog's uni's and if you select the info button of the Moog uni, it will give you a nice picture with numbers to the different uni's in your truck. Not that I have a preference for Moog, I mention this because of that overview picture they have.

 

When looking them up on Advance auto parts they come up with a bunch some are listed as .0336?? Or something I don't remember the size. But apparently there is two different sizes, then inside and outside clip styles. From what I gather one of the factors is abs brakes and non abs brakes but that might be just the front axle joints.

I want to do those too.

 

Here's all the part numbers you will ever want.
Download and search till you're dizzy..
http://www.xjjeeps.com/pdf/1994_-_19...ts_catalog.pdf

 

Still it seems that there are two different diameters... I'm just so fed up with looking haha